Augst: observed built density
Municipality in the canton of Basel-Landschaft · FSO no. 2822 · Parcel data as of July 2025
- Parcels
- 459
< 1 % of the canton
- Municipal zones
- 28
- Median utilization
- 13 %
Canton: 41 %
Switzerland: 10 %
- Median GFZ
- 0.09
Canton: 0.22
Switzerland: 0.09
- Median height
- 9.6 m
Canton: 9.6 m
Switzerland: 9.5 m
- Median floors
- 2.0
Canton: 2.1
Switzerland: 2.3
About Augst
Augst is a municipality in the canton of Basel-Landschaft. The parcel data lists 459 parcels in 28 municipal zone types. The zone types with the most parcels are Wohnzone W2 (134), Kernzone K2 (50) and Strasse innerhalb ZPS (45).
The median parcel is built to a volume utilization of 13 %; half of the parcels lie between 5 % and 89 %. The canton median is 41 %, so Augst sits below it.
The median building height is 9.6 m at 2.0 floors, and the median floor-area ratio (GFZ) is 0.09. Parcels built in the last 20 years reach a mean volume utilization of 114 % (46 parcels), higher than the 60 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone W2 | 134 | 79 % |
| Kernzone K2 | 50 | 100 % |
| Strasse innerhalb ZPS | 45 | 0 % |
| Wald | 31 | 0 % |
| Zone für öffentliche Werke und Anlagen OeWA | 26 | 0 % |
| Archäologische Schutzzone | 22 | 0 % |
| Landwirtschaftszone | 22 | 0 % |
| Wohn- / Geschäftszone WG2 | 16 | 86 % |
| Gewässer | 14 | 0 % |
| Strasse ausserhalb ZPS | 14 | 0 % |
| Wohn- und Geschäftszone WG4 | 13 | 99 % |
| Wohn- und Geschäftszone WG3 | 12 | 73 % |
| Other zones (16) | 60 | - |
Volume utilization (ratioV)
Of the 437 parcels with a value, half lie between 5 % and 89 %. The median is 13 % and the mean 50 %.
Share of parcels by range
- below 50 %55 %
- 50 % to below 100 %24 %
- 100 % to below 150 %13 %
- 150 % and above8 %
Floor-area ratio (GFZ)
Of the 437 parcels with a value, half lie between 0.05 and 0.49. The median is 0.09 and the mean 0.34.
Share of parcels by range
- below 0.5076 %
- 0.50 to below 1.0016 %
- 1.00 to below 1.503 %
- 1.50 and above6 %
Building height
Of the 208 parcels with a value, half lie between 7.8 m and 11.7 m. The median is 9.6 m and the mean 9.7 m.
Share of parcels by range
- below 8 m27 %
- 8 m to below 12 m52 %
- 12 m to below 20 m21 %
- 20 m and above0 %
Number of floors
Of the 202 parcels with a value, half lie between 1.3 and 2.7. The median is 2.0 and the mean 2.1.
Share of parcels by range
- below 232 %
- 2 to below 340 %
- 3 to below 525 %
- 5 and above3 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 459 | 60 % |
| Last 60 years | 140 | 111 % |
| Last 40 years | 87 | 113 % |
| Last 20 years | 46 | 114 % |
| Last 15 years | 42 | 116 % |
| Last 10 years | 16 | 108 % |
| Last 5 years | 8 | 111 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).