Uznach: observed built density
Municipality in the canton of St. Gallen · FSO no. 3339 · Parcel data as of July 2025
- Parcels
- 1’625
1 % of the canton
- Municipal zones
- 25
- Median utilization
- 72 %
Canton: 58 %
Switzerland: 10 %
- Median GFZ
- 0.45
Canton: 0.28
Switzerland: 0.09
- Median height
- 9.6 m
Canton: 9.6 m
Switzerland: 9.5 m
- Median floors
- 2.6
Canton: 2.4
Switzerland: 2.3
About Uznach
Uznach is a municipality in the canton of St. Gallen. The parcel data lists 1’625 parcels in 25 municipal zone types. The zone types with the most parcels are BauG Wohnzone W2a (542), BauG Wohnzone W2 (301) and BauG Wohn-Gewerbezone WG3 (156).
The median parcel is built to a volume utilization of 72 %; half of the parcels lie between 24 % and 101 %. The canton median is 58 %, so Uznach sits above it.
The median building height is 9.6 m at 2.6 floors, and the median floor-area ratio (GFZ) is 0.45. Parcels built in the last 20 years reach a mean volume utilization of 112 % (247 parcels), higher than the 78 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| BauG Wohnzone W2a | 542 | 82 % |
| BauG Wohnzone W2 | 301 | 79 % |
| BauG Wohn-Gewerbezone WG3 | 156 | 85 % |
| BauG Landwirtschaftszone | 129 | 8 % |
| BauG Kernzone Altstadt | 72 | 92 % |
| BauG Wohn-Gewerbezone WG2 | 72 | 48 % |
| BauG Wohnzone W3 | 63 | 72 % |
| BauG übriges Gemeindegebiet allg | 40 | 0 % |
| BauG Gewerbe-Industriezone GI B | 31 | 65 % |
| BauG Gewerbe-Industriezone GI C | 30 | 85 % |
| BauG Grünzone vor III Nachtrag zu BauG | 30 | 0 % |
| BauG Zone für öffentliche Bauten und Anlagen | 29 | 127 % |
| Other zones (13) | 130 | - |
Volume utilization (ratioV)
Of the 1’597 parcels with a value, half lie between 24 % and 101 %. The median is 72 % and the mean 75 %.
Share of parcels by range
- below 50 %34 %
- 50 % to below 100 %40 %
- 100 % to below 150 %18 %
- 150 % and above8 %
Floor-area ratio (GFZ)
Of the 1’597 parcels with a value, half lie between 0.15 and 0.70. The median is 0.45 and the mean 0.54.
Share of parcels by range
- below 0.5057 %
- 0.50 to below 1.0031 %
- 1.00 to below 1.507 %
- 1.50 and above5 %
Building height
Of the 1’247 parcels with a value, half lie between 8.2 m and 11.6 m. The median is 9.6 m and the mean 10.1 m.
Share of parcels by range
- below 8 m21 %
- 8 m to below 12 m59 %
- 12 m to below 20 m20 %
- 20 m and above< 1 %
Number of floors
Of the 959 parcels with a value, half lie between 2.0 and 3.2. The median is 2.6 and the mean 2.7.
Share of parcels by range
- below 23 %
- 2 to below 342 %
- 3 to below 553 %
- 5 and above2 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’625 | 78 % |
| Last 60 years | 882 | 98 % |
| Last 40 years | 650 | 105 % |
| Last 20 years | 247 | 112 % |
| Last 15 years | 154 | 115 % |
| Last 10 years | 76 | 118 % |
| Last 5 years | 38 | 130 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).