roomOpen the map

Tübach: observed built density

Municipality in the canton of St. Gallen · FSO no. 3218 · Parcel data as of July 2025

Parcels
508

< 1 % of the canton

Municipal zones
24
Median utilization
64 %

Canton: 58 %

Switzerland: 10 %

Median GFZ
0.34

Canton: 0.28

Switzerland: 0.09

Median height
9.7 m

Canton: 9.6 m

Switzerland: 9.5 m

Median floors
2.5

Canton: 2.4

Switzerland: 2.3

About Tübach

Tübach is a municipality in the canton of St. Gallen. The parcel data lists 508 parcels in 24 municipal zone types. The zone types with the most parcels are BauG Wohnzone W2a (122), BauG Landwirtschaftszone (76) and BauG Wohnzone W2b (65).

The median parcel is built to a volume utilization of 64 %; half of the parcels lie between 8 % and 100 %. The canton median is 58 %, close to the level of Tübach.

The median building height is 9.7 m at 2.5 floors, and the median floor-area ratio (GFZ) is 0.34. Parcels built in the last 20 years reach a mean volume utilization of 140 % (96 parcels), higher than the 81 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
BauG Wohnzone W2a12283 %
BauG Landwirtschaftszone760 %
BauG Wohnzone W2b6568 %
BauG Gewerbe-Industriezone GI A36114 %
BauG Wohn-Gewerbezone WG23463 %
BauG Dorfkernzone DK22893 %
Hinweis.Verkehrsflaeche iB270 %
BauG Wohnzone WE2153 %
BauG Zone für öffentliche Bauten und Anlagen1690 %
BauG übriges Gemeindegebiet allg150 %
Hinweis.Wald130 %
BauG Wohn-Gewerbezone WG31067 %
Other zones (12)45-

Volume utilization (ratioV)

Of the 487 parcels with a value, half lie between 8 % and 100 %. The median is 64 % and the mean 72 %.

0 %300 %+

Share of parcels by range

  • below 50 %42 %
  • 50 % to below 100 %33 %
  • 100 % to below 150 %16 %
  • 150 % and above9 %

Floor-area ratio (GFZ)

Of the 487 parcels with a value, half lie between 0.07 and 0.61. The median is 0.34 and the mean 0.39.

0.003.00+

Share of parcels by range

  • below 0.5068 %
  • 0.50 to below 1.0024 %
  • 1.00 to below 1.507 %
  • 1.50 and above1 %

Building height

Of the 324 parcels with a value, half lie between 8.4 m and 11.5 m. The median is 9.7 m and the mean 10.1 m.

0 m60 m+

Share of parcels by range

  • below 8 m19 %
  • 8 m to below 12 m62 %
  • 12 m to below 20 m19 %
  • 20 m and above< 1 %

Number of floors

Of the 259 parcels with a value, half lie between 1.9 and 3.1. The median is 2.5 and the mean 2.5.

016+

Share of parcels by range

  • below 27 %
  • 2 to below 345 %
  • 3 to below 548 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years50881 %
Last 60 years285110 %
Last 40 years182123 %
Last 20 years96140 %
Last 15 years68167 %
Last 10 years30180 %
Last 5 years5109 %

Open the map at Tübach

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).