roomOpen the map

St. Margrethen: observed built density

Municipality in the canton of St. Gallen · FSO no. 3236 · Parcel data as of July 2025

Parcels
1’960

1 % of the canton

Municipal zones
27
Median utilization
67 %

Canton: 58 %

Switzerland: 10 %

Median GFZ
0.37

Canton: 0.28

Switzerland: 0.09

Median height
9.5 m

Canton: 9.6 m

Switzerland: 9.5 m

Median floors
2.4

Canton: 2.4

Switzerland: 2.3

About St. Margrethen

St. Margrethen is a municipality in the canton of St. Gallen. The parcel data lists 1’960 parcels in 27 municipal zone types. The zone types with the most parcels are BauG Wohnzone WE (410), BauG Wohnzone W2 (304) and BauG Wohn-Gewerbezone WG3 (251).

The median parcel is built to a volume utilization of 67 %; half of the parcels lie between 8 % and 105 %. The canton median is 58 %, so St. Margrethen sits above it.

The median building height is 9.5 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.37. Parcels built in the last 20 years reach a mean volume utilization of 110 % (240 parcels), higher than the 72 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
BauG Wohnzone WE41077 %
BauG Wohnzone W230498 %
BauG Wohn-Gewerbezone WG325174 %
BauG Landwirtschaftszone1900 %
BauG Wohn-Gewerbezone WG212694 %
BauG Wohnzone W312580 %
Hinweis.Verkehrsflaeche iB970 %
BauG Wohnzone W47557 %
Hinweis.Wald620 %
BauG Kernzone K45269 %
BauG Zone für öffentliche Bauten und Anlagen4633 %
BauG Industriezone IA43103 %
Other zones (15)179-

Volume utilization (ratioV)

Of the 1’927 parcels with a value, half lie between 8 % and 105 %. The median is 67 % and the mean 69 %.

0 %300 %+

Share of parcels by range

  • below 50 %41 %
  • 50 % to below 100 %31 %
  • 100 % to below 150 %20 %
  • 150 % and above9 %

Floor-area ratio (GFZ)

Of the 1’927 parcels with a value, half lie between 0.08 and 0.65. The median is 0.37 and the mean 0.43.

0.003.00+

Share of parcels by range

  • below 0.5064 %
  • 0.50 to below 1.0026 %
  • 1.00 to below 1.508 %
  • 1.50 and above2 %

Building height

Of the 1’309 parcels with a value, half lie between 8.2 m and 11.5 m. The median is 9.5 m and the mean 10.0 m.

0 m60 m+

Share of parcels by range

  • below 8 m22 %
  • 8 m to below 12 m59 %
  • 12 m to below 20 m18 %
  • 20 m and above2 %

Number of floors

Of the 999 parcels with a value, half lie between 1.9 and 3.1. The median is 2.4 and the mean 2.5.

016+

Share of parcels by range

  • below 25 %
  • 2 to below 351 %
  • 3 to below 541 %
  • 5 and above3 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’96072 %
Last 60 years795105 %
Last 40 years519111 %
Last 20 years240110 %
Last 15 years159121 %
Last 10 years108130 %
Last 5 years50151 %

Open the map at St. Margrethen

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).