roomOpen the map

Gerlafingen: observed built density

Municipality in the canton of Solothurn · FSO no. 2519 · Parcel data as of July 2025

Parcels
1’240

1 % of the canton

Municipal zones
17
Median utilization
82 %

Canton: 29 %

Switzerland: 10 %

Median GFZ
0.39

Canton: 0.10

Switzerland: 0.09

Median height
9.0 m

Canton: 9.2 m

Switzerland: 9.5 m

Median floors
2.2

Canton: 2.2

Switzerland: 2.3

About Gerlafingen

Gerlafingen is a municipality in the canton of Solothurn. The parcel data lists 1’240 parcels in 17 municipal zone types. The zone types with the most parcels are Wohnzone bis 3 Geschosse E, W3E (519), Wohnzone bis 3 Geschosse, W3 (237) and Wohnzone bis 4 Geschosse, W4 (154).

The median parcel is built to a volume utilization of 82 %; half of the parcels lie between 46 % and 111 %. The canton median is 29 %, so Gerlafingen sits above it.

The median building height is 9.0 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.39. Parcels built in the last 20 years reach a mean volume utilization of 102 % (213 parcels), higher than the 82 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Wohnzone bis 3 Geschosse E, W3E51988 %
Wohnzone bis 3 Geschosse, W323780 %
Wohnzone bis 4 Geschosse, W4154103 %
Verkehrszone Strasse1160 %
Kernzone bis 4 Geschosse, K48098 %
Kernzone bis 3 Geschosse, K33787 %
Gewerbezone, G1856 %
Mischzone, M1843 %
Zone für öffentliche Bauten und Anlagen, öBA13106 %
Landwirtschaftszone120 %
Kommunale Uferschutzzone innerhalb Bauzone, Uf100 %
Industriezone, I610 %
Other zones (5)20-

Volume utilization (ratioV)

Of the 1’223 parcels with a value, half lie between 46 % and 111 %. The median is 82 % and the mean 80 %.

0 %300 %+

Share of parcels by range

  • below 50 %26 %
  • 50 % to below 100 %40 %
  • 100 % to below 150 %26 %
  • 150 % and above8 %

Floor-area ratio (GFZ)

Of the 1’223 parcels with a value, half lie between 0.22 and 0.57. The median is 0.39 and the mean 0.41.

0.003.00+

Share of parcels by range

  • below 0.5067 %
  • 0.50 to below 1.0029 %
  • 1.00 to below 1.503 %
  • 1.50 and above1 %

Building height

Of the 966 parcels with a value, half lie between 7.4 m and 10.8 m. The median is 9.0 m and the mean 9.2 m.

0 m60 m+

Share of parcels by range

  • below 8 m34 %
  • 8 m to below 12 m53 %
  • 12 m to below 20 m13 %
  • 20 m and above< 1 %

Number of floors

Of the 769 parcels with a value, half lie between 1.8 and 2.8. The median is 2.2 and the mean 2.3.

016+

Share of parcels by range

  • below 28 %
  • 2 to below 359 %
  • 3 to below 533 %
  • 5 and above1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’24082 %
Last 60 years57599 %
Last 40 years408102 %
Last 20 years213102 %
Last 15 years152104 %
Last 10 years86112 %
Last 5 years31115 %

Open the map at Gerlafingen

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).