Nuglar-St. Pantaleon: observed built density
Municipality in the canton of Solothurn · FSO no. 2478 · Parcel data as of July 2025
- Parcels
- 3’013
3 % of the canton
- Municipal zones
- 18
- Median utilization
- 6 %
Canton: 29 %
Switzerland: 10 %
- Median GFZ
- 0.06
Canton: 0.10
Switzerland: 0.09
- Median height
- 9.0 m
Canton: 9.2 m
Switzerland: 9.5 m
- Median floors
- 2.1
Canton: 2.2
Switzerland: 2.3
About Nuglar-St. Pantaleon
Nuglar-St. Pantaleon is a municipality in the canton of Solothurn. The parcel data lists 3’013 parcels in 18 municipal zone types. The zone types with the most parcels are Landwirtschaftszone (1’713), Wohnzone W1-2 (554) and Wald (323).
The median parcel is built to a volume utilization of 6 %; half of the parcels lie between 3 % and 10 %. The canton median is 29 %, so Nuglar-St. Pantaleon sits below it.
The median building height is 9.0 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.06. Parcels built in the last 20 years reach a mean volume utilization of 103 % (111 parcels), higher than the 23 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Landwirtschaftszone | 1’713 | 0 % |
| Wohnzone W1-2 | 554 | 90 % |
| Wald | 323 | 0 % |
| Kernzone | 166 | 91 % |
| Uferschutzzone | 77 | 0 % |
| Verkehrszone Strasse | 63 | 0 % |
| Hofstattzone | 34 | 0 % |
| Verkehrsfläche Strasse | 24 | 0 % |
| Reservezone Arbeiten | 23 | 0 % |
| Zone für öffentliche Bauten und Anlagen | 10 | 30 % |
| Gewerbezone | 6 | 47 % |
| Gewässer | 6 | 0 % |
| Other zones (6) | 14 | - |
Volume utilization (ratioV)
Of the 2’987 parcels with a value, half lie between 3 % and 10 %. The median is 6 % and the mean 22 %.
Share of parcels by range
- below 50 %81 %
- 50 % to below 100 %9 %
- 100 % to below 150 %7 %
- 150 % and above3 %
Floor-area ratio (GFZ)
Of the 2’987 parcels with a value, half lie between 0.03 and 0.09. The median is 0.06 and the mean 0.13.
Share of parcels by range
- below 0.5090 %
- 0.50 to below 1.007 %
- 1.00 to below 1.501 %
- 1.50 and above1 %
Building height
Of the 649 parcels with a value, half lie between 7.5 m and 10.5 m. The median is 9.0 m and the mean 9.0 m.
Share of parcels by range
- below 8 m30 %
- 8 m to below 12 m62 %
- 12 m to below 20 m8 %
- 20 m and above0 %
Number of floors
Of the 497 parcels with a value, half lie between 1.7 and 2.5. The median is 2.1 and the mean 2.1.
Share of parcels by range
- below 210 %
- 2 to below 368 %
- 3 to below 522 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 3’013 | 23 % |
| Last 60 years | 486 | 97 % |
| Last 40 years | 350 | 99 % |
| Last 20 years | 111 | 103 % |
| Last 15 years | 74 | 108 % |
| Last 10 years | 48 | 109 % |
| Last 5 years | 23 | 108 % |
Open the map at Nuglar-St. Pantaleon
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).