roomOpen the map

Triengen: observed built density

Municipality in the canton of Lucerne · FSO no. 1104 · Parcel data as of July 2025

Parcels
2’215

2 % of the canton

Municipal zones
23
Median utilization
10 %

Canton: 49 %

Switzerland: 10 %

Median GFZ
0.09

Canton: 0.13

Switzerland: 0.09

Median height
-

Canton: -

Switzerland: 9.5 m

Median floors
2.3

Canton: 2.4

Switzerland: 2.3

About Triengen

Triengen is a municipality in the canton of Lucerne. The parcel data lists 2’215 parcels in 23 municipal zone types. The zone types with the most parcels are Landwirtschaftszone (707), Zweigeschossige Wohnzone B (439) and Wald (332).

The median parcel is built to a volume utilization of 10 %; half of the parcels lie between 5 % and 91 %. The canton median is 49 %, so Triengen sits below it.

Parcels built in the last 20 years reach a mean volume utilization of 161 % (307 parcels), higher than the 78 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaftszone7070 %
Zweigeschossige Wohnzone B43980 %
Wald3320 %
Zweigeschossige Wohnzone A13179 %
Dreigeschossige Wohnzone A10972 %
Dreigeschossige Wohnzone B74100 %
Abbbauzone730 %
Dorfzone B6854 %
Arbeitszone III5560 %
Dreigeschossige Arbeits- und Wohnzone3589 %
Dorfzone A3490 %
Zone für öffentliche Zwecke2937 %
Other zones (11)129-

Volume utilization (ratioV)

Of the 2’187 parcels with a value, half lie between 5 % and 91 %. The median is 10 % and the mean 71 %.

0 %300 %+

Share of parcels by range

  • below 50 %59 %
  • 50 % to below 100 %20 %
  • 100 % to below 150 %11 %
  • 150 % and above10 %

Floor-area ratio (GFZ)

Of the 2’187 parcels with a value, half lie between 0.04 and 0.36. The median is 0.09 and the mean 0.20.

0.003.00+

Share of parcels by range

  • below 0.5086 %
  • 0.50 to below 1.0012 %
  • 1.00 to below 1.502 %
  • 1.50 and above< 1 %

Building height

The parcel data has too few values for this measure here.

Number of floors

Of the 737 parcels with a value, half lie between 1.8 and 2.9. The median is 2.3 and the mean 2.4.

016+

Share of parcels by range

  • below 27 %
  • 2 to below 357 %
  • 3 to below 535 %
  • 5 and above1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years2’21578 %
Last 60 years887140 %
Last 40 years715139 %
Last 20 years307161 %
Last 15 years222185 %
Last 10 years114216 %
Last 5 years42300 %

Open the map at Triengen

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).