Adligenswil: observed built density
Municipality in the canton of Lucerne · FSO no. 1051 · Parcel data as of July 2025
- Parcels
- 1’634
1 % of the canton
- Municipal zones
- 23
- Median utilization
- 66 %
Canton: 49 %
Switzerland: 10 %
- Median GFZ
- 0.36
Canton: 0.13
Switzerland: 0.09
- Median height
- -
Canton: -
Switzerland: 9.5 m
- Median floors
- 2.4
Canton: 2.4
Switzerland: 2.3
About Adligenswil
Adligenswil is a municipality in the canton of Lucerne. The parcel data lists 1’634 parcels in 23 municipal zone types. The zone types with the most parcels are 2-geschossige Wohnzone (810), Wald (135) and 3-geschossige Wohnzone (120).
The median parcel is built to a volume utilization of 66 %; half of the parcels lie between 9 % and 101 %. The canton median is 49 %, so Adligenswil sits above it.
Parcels built in the last 20 years reach a mean volume utilization of 123 % (143 parcels), higher than the 84 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| 2-geschossige Wohnzone | 810 | 78 % |
| Wald | 135 | 0 % |
| 3-geschossige Wohnzone | 120 | 77 % |
| Landwirtschaftszone | 112 | 11 % |
| 2-geschossige Wohnzone mit verdichteter Bauweise | 100 | 86 % |
| 2-geschossige Wohnzone Chliäbnet | 98 | 66 % |
| Wohnzone mit Konzept- und Gestaltungsplanpflicht | 38 | 97 % |
| Ueberiges Gebiet A | 37 | 0 % |
| Arbeitszone mit Wohnanteil a | 34 | 24 % |
| Naturschutzzone | 24 | 0 % |
| Wohnzone mit Volumenerhaltung | 24 | 85 % |
| Arbeitszone mit Wohnanteil b | 21 | 82 % |
| Other zones (11) | 81 | - |
Volume utilization (ratioV)
Of the 1’606 parcels with a value, half lie between 9 % and 101 %. The median is 66 % and the mean 78 %.
Share of parcels by range
- below 50 %38 %
- 50 % to below 100 %36 %
- 100 % to below 150 %17 %
- 150 % and above8 %
Floor-area ratio (GFZ)
Of the 1’606 parcels with a value, half lie between 0.08 and 0.56. The median is 0.36 and the mean 0.39.
Share of parcels by range
- below 0.5069 %
- 0.50 to below 1.0025 %
- 1.00 to below 1.505 %
- 1.50 and above2 %
Building height
The parcel data has too few values for this measure here.
Number of floors
Of the 972 parcels with a value, half lie between 1.9 and 3.1. The median is 2.4 and the mean 2.5.
Share of parcels by range
- below 24 %
- 2 to below 349 %
- 3 to below 545 %
- 5 and above2 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’634 | 84 % |
| Last 60 years | 1’128 | 102 % |
| Last 40 years | 597 | 106 % |
| Last 20 years | 143 | 123 % |
| Last 15 years | 97 | 136 % |
| Last 10 years | 70 | 156 % |
| Last 5 years | 45 | 175 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).