Port: observed built density
Municipality in the canton of Bern · FSO no. 745 · Parcel data as of July 2025
- Parcels
- 1’135
< 1 % of the canton
- Municipal zones
- 25
- Median utilization
- 62 %
Canton: 32 %
Switzerland: 10 %
- Median GFZ
- 0.39
Canton: 0.09
Switzerland: 0.09
- Median height
- 9.1 m
Canton: 9.5 m
Switzerland: 9.5 m
- Median floors
- 2.2
Canton: 2.3
Switzerland: 2.3
About Port
Port is a municipality in the canton of Bern. The parcel data lists 1’135 parcels in 25 municipal zone types. The zone types with the most parcels are Wohnzone W2 (797), Wohnzone W3A (104) and Landwirtschaftszone LWZ (52).
The median parcel is built to a volume utilization of 62 %; half of the parcels lie between 16 % and 95 %. The canton median is 32 %, so Port sits above it.
The median building height is 9.1 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.39. Parcels built in the last 20 years reach a mean volume utilization of 346 % (116 parcels), higher than the 95 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone W2 | 797 | 66 % |
| Wohnzone W3A | 104 | 61 % |
| Landwirtschaftszone LWZ | 52 | 0 % |
| Wohnzone W4 | 31 | 79 % |
| Mischzone M3 | 28 | 67 % |
| Kernzone K | 24 | 55 % |
| Arbeitszone A | 23 | 60 % |
| Übriges Gebiet | 19 | 0 % |
| Wohnzone W3B | 12 | 111 % |
| Mischzone M4 | 7 | 0 % |
| Zone für öffentliche Nutzungen ZöN Nr. 4 "Friedhof" | 7 | 4 % |
| Zone für Sport- und Freizeitanlagen ZSF Nr. 5 "Sportanlagen, Freizeiteinrichtung | 6 | 6 % |
| Other zones (13) | 25 | - |
Volume utilization (ratioV)
Of the 1’114 parcels with a value, half lie between 16 % and 95 %. The median is 62 % and the mean 70 %.
Share of parcels by range
- below 50 %37 %
- 50 % to below 100 %41 %
- 100 % to below 150 %12 %
- 150 % and above9 %
Floor-area ratio (GFZ)
Of the 1’113 parcels with a value, half lie between 0.10 and 0.59. The median is 0.39 and the mean 0.45.
Share of parcels by range
- below 0.5065 %
- 0.50 to below 1.0024 %
- 1.00 to below 1.508 %
- 1.50 and above3 %
Building height
Of the 825 parcels with a value, half lie between 7.7 m and 10.8 m. The median is 9.1 m and the mean 9.3 m.
Share of parcels by range
- below 8 m29 %
- 8 m to below 12 m57 %
- 12 m to below 20 m14 %
- 20 m and above0 %
Number of floors
Of the 703 parcels with a value, half lie between 1.8 and 2.8. The median is 2.2 and the mean 2.3.
Share of parcels by range
- below 29 %
- 2 to below 359 %
- 3 to below 531 %
- 5 and above1 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’135 | 95 % |
| Last 60 years | 576 | 145 % |
| Last 40 years | 365 | 186 % |
| Last 20 years | 116 | 346 % |
| Last 15 years | 88 | 425 % |
| Last 10 years | 60 | 567 % |
| Last 5 years | 8 | 150 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).