Oberried am Brienzersee: observed built density
Municipality in the canton of Bern · FSO no. 589 · Parcel data as of July 2025
- Parcels
- 827
< 1 % of the canton
- Municipal zones
- 18
- Median utilization
- 15 %
Canton: 32 %
Switzerland: 10 %
- Median GFZ
- 0.07
Canton: 0.09
Switzerland: 0.09
- Median height
- 8.5 m
Canton: 9.5 m
Switzerland: 9.5 m
- Median floors
- 2.3
Canton: 2.3
Switzerland: 2.3
About Oberried am Brienzersee
Oberried am Brienzersee is a municipality in the canton of Bern. The parcel data lists 827 parcels in 18 municipal zone types. The zone types with the most parcels are Restfläche (482), Wohn- und Gewerbezone WG2 (61) and Dorfkernzone (54).
The median parcel is built to a volume utilization of 15 %; half of the parcels lie between 5 % and 97 %. The canton median is 32 %, so Oberried am Brienzersee sits below it.
The median building height is 8.5 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 192 % (43 parcels), higher than the 113 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Restfläche | 482 | 0 % |
| Wohn- und Gewerbezone WG2 | 61 | 87 % |
| Dorfkernzone | 54 | 77 % |
| Dorfkernzone Ufer UDKZ | 51 | 111 % |
| Dorfkernzone Derfli DKZD | 41 | 281 % |
| Wohnzone UW2 | 40 | 107 % |
| Verkehrszone | 28 | 0 % |
| Wohn- und Gewerbezone UWG2 | 24 | 75 % |
| Ferienhauszone Hambergerareal | 21 | 94 % |
| Wohnzone W2 | 10 | 126 % |
| Grünzone GrZ | 3 | 0 % |
| ZSF D | 3 | 0 % |
| Other zones (6) | 9 | - |
Volume utilization (ratioV)
Of the 810 parcels with a value, half lie between 5 % and 97 %. The median is 15 % and the mean 96 %.
Share of parcels by range
- below 50 %60 %
- 50 % to below 100 %16 %
- 100 % to below 150 %10 %
- 150 % and above14 %
Floor-area ratio (GFZ)
Of the 810 parcels with a value, half lie between 0.04 and 0.40. The median is 0.07 and the mean 0.30.
Share of parcels by range
- below 0.5078 %
- 0.50 to below 1.0014 %
- 1.00 to below 1.504 %
- 1.50 and above4 %
Building height
Of the 401 parcels with a value, half lie between 7.0 m and 9.9 m. The median is 8.5 m and the mean 8.7 m.
Share of parcels by range
- below 8 m40 %
- 8 m to below 12 m54 %
- 12 m to below 20 m6 %
- 20 m and above< 1 %
Number of floors
Of the 211 parcels with a value, half lie between 1.8 and 3.0. The median is 2.3 and the mean 2.5.
Share of parcels by range
- below 210 %
- 2 to below 348 %
- 3 to below 536 %
- 5 and above5 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 827 | 113 % |
| Last 60 years | 158 | 190 % |
| Last 40 years | 115 | 196 % |
| Last 20 years | 43 | 192 % |
| Last 15 years | 27 | 137 % |
| Last 10 years | 19 | 154 % |
| Last 5 years | 8 | 142 % |
Open the map at Oberried am Brienzersee
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).