Bremgarten bei Bern: observed built density
Municipality in the canton of Bern · FSO no. 353 · Parcel data as of July 2025
- Parcels
- 1’462
< 1 % of the canton
- Municipal zones
- 25
- Median utilization
- 78 %
Canton: 32 %
Switzerland: 10 %
- Median GFZ
- 0.51
Canton: 0.09
Switzerland: 0.09
- Median height
- 8.6 m
Canton: 9.5 m
Switzerland: 9.5 m
- Median floors
- 2.1
Canton: 2.3
Switzerland: 2.3
About Bremgarten bei Bern
Bremgarten bei Bern is a municipality in the canton of Bern. The parcel data lists 1’462 parcels in 25 municipal zone types. The zone types with the most parcels are Wohnzone W2 (670), Wohnzone W1 (160) and Sektor A (USP) (140).
The median parcel is built to a volume utilization of 78 %; half of the parcels lie between 49 % and 112 %. The canton median is 32 %, so Bremgarten bei Bern sits above it.
The median building height is 8.6 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.51. Parcels built in the last 20 years reach a mean volume utilization of 150 % (116 parcels), lower than the 168 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone W2 | 670 | 82 % |
| Wohnzone W1 | 160 | 73 % |
| Sektor A (USP) | 140 | - |
| Terrassenhauszone TZ | 125 | 94 % |
| Sektor B (USP) | 92 | - |
| Mischzone M4 (kant. Zonentyp) | 81 | 51 % |
| Wohnzone W3 (kant. Zonentyp) | 73 | 1’780 % |
| Verkehrszone VZ | 38 | 0 % |
| übriges Gebiet | 26 | 0 % |
| Landwirtschaftszone LWZ | 17 | 0 % |
| Mischzone MA2 | 14 | 102 % |
| Grünzone GR | 7 | 1 % |
| Other zones (10) | 19 | - |
Volume utilization (ratioV)
Of the 1’432 parcels with a value, half lie between 49 % and 112 %. The median is 78 % and the mean 163 %.
Share of parcels by range
- below 50 %25 %
- 50 % to below 100 %40 %
- 100 % to below 150 %22 %
- 150 % and above12 %
Floor-area ratio (GFZ)
Of the 1’432 parcels with a value, half lie between 0.32 and 0.74. The median is 0.51 and the mean 0.58.
Share of parcels by range
- below 0.5049 %
- 0.50 to below 1.0040 %
- 1.00 to below 1.506 %
- 1.50 and above5 %
Building height
Of the 1’204 parcels with a value, half lie between 7.0 m and 10.3 m. The median is 8.6 m and the mean 8.7 m.
Share of parcels by range
- below 8 m41 %
- 8 m to below 12 m51 %
- 12 m to below 20 m7 %
- 20 m and above< 1 %
Number of floors
Of the 944 parcels with a value, half lie between 1.7 and 2.7. The median is 2.1 and the mean 2.2.
Share of parcels by range
- below 213 %
- 2 to below 358 %
- 3 to below 529 %
- 5 and above< 1 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’462 | 168 % |
| Last 60 years | 780 | 247 % |
| Last 40 years | 328 | 250 % |
| Last 20 years | 116 | 150 % |
| Last 15 years | 70 | 182 % |
| Last 10 years | 20 | 108 % |
| Last 5 years | 13 | 102 % |
Open the map at Bremgarten bei Bern
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).