roomOpen the map

Saint-Sulpice (VD): observed built density

Municipality in the canton of Vaud · FSO no. 5648 · Parcel data as of July 2025

Parcels
752

< 1 % of the canton

Municipal zones
18
Median utilization
55 %

Canton: 9 %

Switzerland: 10 %

Median GFZ
0.28

Canton: 0.09

Switzerland: 0.09

Median height
-

Canton: -

Switzerland: 9.5 m

Median floors
2.5

Canton: 2.4

Switzerland: 2.3

About Saint-Sulpice (VD)

Saint-Sulpice (VD) is a municipality in the canton of Vaud. The parcel data lists 752 parcels in 18 municipal zone types. The zone types with the most parcels are Zone d'habitation de très faible densité 15 LAT (323), Zone d'habitation de faible densité 15 LAT (229) and Zone centrale 15 LAT (82).

The median parcel is built to a volume utilization of 55 %; half of the parcels lie between 24 % and 89 %. The canton median is 9 %, so Saint-Sulpice (VD) sits above it.

Parcels built in the last 20 years reach a mean volume utilization of 107 % (147 parcels), higher than the 64 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone d'habitation de très faible densité 15 LAT32366 %
Zone d'habitation de faible densité 15 LAT22943 %
Zone centrale 15 LAT8274 %
Zone de desserte 15 LAT340 %
Zone affectée à des besoins publics 15 LAT2313 %
Zone d'activités économiques 15 LAT1481 %
Zone de verdure 15 LAT138 %
Zone d'habitation de moyenne densité 15 LAT998 %
Aire forestière 18 LAT60 %
Zone de protection de la nature et du paysage 17 LAT42 %
Zone centrale 15 LAT - Aires de construction n°3 et 4339 %
Zone des eaux 17 LAT30 %
Other zones (6)9-

Volume utilization (ratioV)

Of the 732 parcels with a value, half lie between 24 % and 89 %. The median is 55 % and the mean 60 %.

0 %300 %+

Share of parcels by range

  • below 50 %46 %
  • 50 % to below 100 %36 %
  • 100 % to below 150 %14 %
  • 150 % and above5 %

Floor-area ratio (GFZ)

Of the 732 parcels with a value, half lie between 0.12 and 0.48. The median is 0.28 and the mean 0.36.

0.003.00+

Share of parcels by range

  • below 0.5077 %
  • 0.50 to below 1.0018 %
  • 1.00 to below 1.503 %
  • 1.50 and above2 %

Building height

The parcel data has too few values for this measure here.

Number of floors

Of the 427 parcels with a value, half lie between 1.9 and 3.2. The median is 2.5 and the mean 2.6.

016+

Share of parcels by range

  • below 27 %
  • 2 to below 342 %
  • 3 to below 548 %
  • 5 and above2 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years75264 %
Last 60 years39483 %
Last 40 years24390 %
Last 20 years147107 %
Last 15 years134108 %
Last 10 years81108 %
Last 5 years32111 %

Open the map at Saint-Sulpice (VD)

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).