roomOpen the map

Renens (VD): observed built density

Municipality in the canton of Vaud · FSO no. 5591 · Parcel data as of July 2025

Parcels
1’593

1 % of the canton

Municipal zones
13
Median utilization
58 %

Canton: 9 %

Switzerland: 10 %

Median GFZ
0.45

Canton: 0.09

Switzerland: 0.09

Median height
-

Canton: -

Switzerland: 9.5 m

Median floors
3.0

Canton: 2.4

Switzerland: 2.3

About Renens (VD)

Renens (VD) is a municipality in the canton of Vaud. The parcel data lists 1’593 parcels in 13 municipal zone types. The zone types with the most parcels are Zone d'habitation de moyenne densité 15 LAT (631), Zone d'habitation de très faible densité 15 LAT (601) and Zone de desserte 15 LAT (86).

The median parcel is built to a volume utilization of 58 %; half of the parcels lie between 16 % and 105 %. The canton median is 9 %, so Renens (VD) sits above it.

Parcels built in the last 20 years reach a mean volume utilization of 142 % (121 parcels), higher than the 87 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone d'habitation de moyenne densité 15 LAT63191 %
Zone d'habitation de très faible densité 15 LAT60157 %
Zone de desserte 15 LAT860 %
Zone d'habitation de forte densité 15 LAT8038 %
Zone d'habitation de faible densité 15 LAT5958 %
Zone d'activités économiques 15 LAT4913 %
Zone centrale 15 LAT3640 %
Zone affectée à des besoins publics 15 LAT243 %
Zone de verdure 15 LAT90 %
Zone ferroviaire 15 LAT70 %
Aire forestière 18 LAT60 %
Zone des eaux 17 LAT30 %
Other zones (1)2-

Volume utilization (ratioV)

Of the 1’576 parcels with a value, half lie between 16 % and 105 %. The median is 58 % and the mean 82 %.

0 %300 %+

Share of parcels by range

  • below 50 %44 %
  • 50 % to below 100 %28 %
  • 100 % to below 150 %14 %
  • 150 % and above13 %

Floor-area ratio (GFZ)

Of the 1’576 parcels with a value, half lie between 0.12 and 1.02. The median is 0.45 and the mean 0.83.

0.003.00+

Share of parcels by range

  • below 0.5054 %
  • 0.50 to below 1.0020 %
  • 1.00 to below 1.5011 %
  • 1.50 and above14 %

Building height

The parcel data has too few values for this measure here.

Number of floors

Of the 945 parcels with a value, half lie between 2.1 and 4.2. The median is 3.0 and the mean 3.3.

016+

Share of parcels by range

  • below 29 %
  • 2 to below 326 %
  • 3 to below 546 %
  • 5 and above19 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’59387 %
Last 60 years550110 %
Last 40 years311123 %
Last 20 years121142 %
Last 15 years92129 %
Last 10 years63125 %
Last 5 years21144 %

Open the map at Renens (VD)

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).