Payerne: observed built density
Municipality in the canton of Vaud · FSO no. 5822 · Parcel data as of July 2025
- Parcels
- 3’114
1 % of the canton
- Municipal zones
- 21
- Median utilization
- 42 %
Canton: 9 %
Switzerland: 10 %
- Median GFZ
- 0.17
Canton: 0.09
Switzerland: 0.09
- Median height
- -
Canton: -
Switzerland: 9.5 m
- Median floors
- 2.3
Canton: 2.4
Switzerland: 2.3
About Payerne
Payerne is a municipality in the canton of Vaud. The parcel data lists 3’114 parcels in 21 municipal zone types. The zone types with the most parcels are Zone d'habitation de très faible densité 15 LAT (807), Zone agricole 16 LAT (601) and Zone de desserte 15 LAT (352).
The median parcel is built to a volume utilization of 42 %; half of the parcels lie between 5 % and 106 %. The canton median is 9 %, so Payerne sits above it.
Parcels built in the last 20 years reach a mean volume utilization of 117 % (365 parcels), higher than the 90 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Zone d'habitation de très faible densité 15 LAT | 807 | 88 % |
| Zone agricole 16 LAT | 601 | 0 % |
| Zone de desserte 15 LAT | 352 | 0 % |
| Zone d'habitation de forte densité 15 LAT | 238 | 191 % |
| Zone d'habitation de moyenne densité 15 LAT | 229 | 74 % |
| Zone centrale 15 LAT | 197 | 96 % |
| Aire forestière 18 LAT | 171 | 0 % |
| Zone d'activités économiques 15 LAT | 171 | 60 % |
| Zone pour petites entités urbanisées 18 LAT | 116 | 92 % |
| Zone intermédiaire 18 LAT | 89 | 0 % |
| Zone d'habitation de faible densité 15 LAT | 33 | 100 % |
| Zone affectée à des besoins publics 15 LAT | 26 | 39 % |
| Other zones (9) | 84 | - |
Volume utilization (ratioV)
Of the 3’085 parcels with a value, half lie between 5 % and 106 %. The median is 42 % and the mean 81 %.
Share of parcels by range
- below 50 %52 %
- 50 % to below 100 %21 %
- 100 % to below 150 %14 %
- 150 % and above14 %
Floor-area ratio (GFZ)
Of the 3’084 parcels with a value, half lie between 0.05 and 0.50. The median is 0.17 and the mean 0.52.
Share of parcels by range
- below 0.5075 %
- 0.50 to below 1.0012 %
- 1.00 to below 1.503 %
- 1.50 and above10 %
Building height
The parcel data has too few values for this measure here.
Number of floors
Of the 1’204 parcels with a value, half lie between 1.8 and 3.2. The median is 2.3 and the mean 2.5.
Share of parcels by range
- below 212 %
- 2 to below 350 %
- 3 to below 531 %
- 5 and above7 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 3’114 | 90 % |
| Last 60 years | 979 | 119 % |
| Last 40 years | 659 | 115 % |
| Last 20 years | 365 | 117 % |
| Last 15 years | 282 | 123 % |
| Last 10 years | 183 | 135 % |
| Last 5 years | 63 | 111 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).