roomOpen the map

Morges: observed built density

Municipality in the canton of Vaud · FSO no. 5642 · Parcel data as of July 2025

Parcels
1’707

1 % of the canton

Municipal zones
19
Median utilization
57 %

Canton: 9 %

Switzerland: 10 %

Median GFZ
0.36

Canton: 0.09

Switzerland: 0.09

Median height
-

Canton: -

Switzerland: 9.5 m

Median floors
3.0

Canton: 2.4

Switzerland: 2.3

About Morges

Morges is a municipality in the canton of Vaud. The parcel data lists 1’707 parcels in 19 municipal zone types. The zone types with the most parcels are Zone d'habitation de moyenne densité 15 LAT (395), Zone d'habitation de très faible densité 15 LAT (298) and Zone centrale 15 LAT (254).

The median parcel is built to a volume utilization of 57 %; half of the parcels lie between 12 % and 105 %. The canton median is 9 %, so Morges sits above it.

Parcels built in the last 20 years reach a mean volume utilization of 111 % (154 parcels), higher than the 80 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone d'habitation de moyenne densité 15 LAT39561 %
Zone d'habitation de très faible densité 15 LAT29872 %
Zone centrale 15 LAT254108 %
Zone de desserte 15 LAT1620 %
Zone d'habitation de faible densité 15 LAT12955 %
Zone d'habitation de forte densité 15 LAT10829 %
Zone d'activités économiques 15 LAT7133 %
Zone centrale 15 LAT - Zone de protection du centre historique57102 %
Zone affectée à des besoins publics 15 LAT5472 %
Zone mixte 15 LAT4532 %
Zone de verdure 15 LAT40302 %
Zone agricole 16 LAT390 %
Other zones (7)55-

Volume utilization (ratioV)

Of the 1’685 parcels with a value, half lie between 12 % and 105 %. The median is 57 % and the mean 75 %.

0 %300 %+

Share of parcels by range

  • below 50 %46 %
  • 50 % to below 100 %27 %
  • 100 % to below 150 %18 %
  • 150 % and above10 %

Floor-area ratio (GFZ)

Of the 1’685 parcels with a value, half lie between 0.10 and 1.00. The median is 0.36 and the mean 0.98.

0.003.00+

Share of parcels by range

  • below 0.5060 %
  • 0.50 to below 1.0015 %
  • 1.00 to below 1.506 %
  • 1.50 and above19 %

Building height

The parcel data has too few values for this measure here.

Number of floors

Of the 992 parcels with a value, half lie between 2.2 and 4.3. The median is 3.0 and the mean 3.4.

016+

Share of parcels by range

  • below 26 %
  • 2 to below 329 %
  • 3 to below 543 %
  • 5 and above22 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’70780 %
Last 60 years558100 %
Last 40 years334106 %
Last 20 years154111 %
Last 15 years116114 %
Last 10 years70118 %
Last 5 years32123 %

Open the map at Morges

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).