roomOpen the map

Crissier: observed built density

Municipality in the canton of Vaud · FSO no. 5583 · Parcel data as of July 2025

Parcels
1’668

1 % of the canton

Municipal zones
14
Median utilization
45 %

Canton: 9 %

Switzerland: 10 %

Median GFZ
0.25

Canton: 0.09

Switzerland: 0.09

Median height
-

Canton: -

Switzerland: 9.5 m

Median floors
2.5

Canton: 2.4

Switzerland: 2.3

About Crissier

Crissier is a municipality in the canton of Vaud. The parcel data lists 1’668 parcels in 14 municipal zone types. The zone types with the most parcels are Zone d'habitation de très faible densité 15 LAT (429), Zone d'habitation de faible densité 15 LAT (289) and Aire forestière 18 LAT (231).

The median parcel is built to a volume utilization of 45 %; half of the parcels lie between 6 % and 92 %. The canton median is 9 %, so Crissier sits above it.

Parcels built in the last 20 years reach a mean volume utilization of 122 % (232 parcels), higher than the 68 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone d'habitation de très faible densité 15 LAT42970 %
Zone d'habitation de faible densité 15 LAT28969 %
Aire forestière 18 LAT2310 %
Zone d'activités économiques 15 LAT22765 %
Zone centrale 15 LAT14252 %
Zone de desserte 15 LAT1180 %
Zone d'habitation de moyenne densité 15 LAT61133 %
Zone d'habitation de forte densité 15 LAT580 %
Zone agricole 16 LAT390 %
Zone intermédiaire 18 LAT270 %
Zone affectée à des besoins publics 15 LAT243 %
Zone de verdure 15 LAT110 %
Other zones (2)12-

Volume utilization (ratioV)

Of the 1’650 parcels with a value, half lie between 6 % and 92 %. The median is 45 % and the mean 61 %.

0 %300 %+

Share of parcels by range

  • below 50 %53 %
  • 50 % to below 100 %24 %
  • 100 % to below 150 %13 %
  • 150 % and above9 %

Floor-area ratio (GFZ)

Of the 1’650 parcels with a value, half lie between 0.06 and 0.61. The median is 0.25 and the mean 0.56.

0.003.00+

Share of parcels by range

  • below 0.5070 %
  • 0.50 to below 1.0015 %
  • 1.00 to below 1.508 %
  • 1.50 and above7 %

Building height

The parcel data has too few values for this measure here.

Number of floors

Of the 724 parcels with a value, half lie between 1.9 and 3.3. The median is 2.5 and the mean 2.7.

016+

Share of parcels by range

  • below 26 %
  • 2 to below 346 %
  • 3 to below 541 %
  • 5 and above8 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’66868 %
Last 60 years728102 %
Last 40 years434120 %
Last 20 years232122 %
Last 15 years206128 %
Last 10 years167131 %
Last 5 years127124 %

Open the map at Crissier

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).