Champagne: observed built density
Municipality in the canton of Vaud · FSO no. 5553 · Parcel data as of July 2025
- Parcels
- 589
< 1 % of the canton
- Municipal zones
- 13
- Median utilization
- 8 %
Canton: 9 %
Switzerland: 10 %
- Median GFZ
- 0.08
Canton: 0.09
Switzerland: 0.09
- Median height
- -
Canton: -
Switzerland: 9.5 m
- Median floors
- 2.4
Canton: 2.4
Switzerland: 2.3
About Champagne
Champagne is a municipality in the canton of Vaud. The parcel data lists 589 parcels in 13 municipal zone types. The zone types with the most parcels are Zone agricole 16 LAT (148), Zone centrale 15 LAT (135) and Zone d'habitation de très faible densité 15 LAT (70).
The median parcel is built to a volume utilization of 8 %; half of the parcels lie between 4 % and 90 %. The canton median is 9 %, so Champagne sits below it.
Parcels built in the last 20 years reach a mean volume utilization of 110 % (61 parcels), higher than the 52 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Zone agricole 16 LAT | 148 | 0 % |
| Zone centrale 15 LAT | 135 | 112 % |
| Zone d'habitation de très faible densité 15 LAT | 70 | 94 % |
| Zone de desserte 15 LAT | 67 | 0 % |
| Zone de protection de la nature et du paysage 17 LAT | 40 | 0 % |
| Zone viticole 16 LAT | 29 | 0 % |
| Zone d'activités économiques 15 LAT | 25 | 56 % |
| Zone de verdure 15 LAT | 24 | 0 % |
| Aire forestière 18 LAT | 20 | 0 % |
| Zone affectée à des besoins publics 15 LAT | 16 | 0 % |
| Zone d'habitation de faible densité 15 LAT | 10 | 94 % |
| Zone des eaux 17 LAT | 4 | 0 % |
| Other zones (1) | 1 | - |
Volume utilization (ratioV)
Of the 579 parcels with a value, half lie between 4 % and 90 %. The median is 8 % and the mean 49 %.
Share of parcels by range
- below 50 %66 %
- 50 % to below 100 %13 %
- 100 % to below 150 %12 %
- 150 % and above10 %
Floor-area ratio (GFZ)
Of the 578 parcels with a value, half lie between 0.04 and 0.37. The median is 0.08 and the mean 0.26.
Share of parcels by range
- below 0.5082 %
- 0.50 to below 1.0010 %
- 1.00 to below 1.504 %
- 1.50 and above3 %
Building height
The parcel data has too few values for this measure here.
Number of floors
Of the 163 parcels with a value, half lie between 1.9 and 3.1. The median is 2.4 and the mean 2.5.
Share of parcels by range
- below 24 %
- 2 to below 349 %
- 3 to below 547 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 589 | 52 % |
| Last 60 years | 138 | 94 % |
| Last 40 years | 108 | 103 % |
| Last 20 years | 61 | 110 % |
| Last 15 years | 39 | 114 % |
| Last 10 years | 14 | 110 % |
| Last 5 years | 7 | 59 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).