roomOpen the map

Boussens: observed built density

Municipality in the canton of Vaud · FSO no. 5473 · Parcel data as of July 2025

Parcels
394

< 1 % of the canton

Municipal zones
12
Median utilization
10 %

Canton: 9 %

Switzerland: 10 %

Median GFZ
0.09

Canton: 0.09

Switzerland: 0.09

Median height
-

Canton: -

Switzerland: 9.5 m

Median floors
2.2

Canton: 2.4

Switzerland: 2.3

About Boussens

Boussens is a municipality in the canton of Vaud. The parcel data lists 394 parcels in 12 municipal zone types. The zone types with the most parcels are Zone agricole 16 LAT (91), Zone centrale 15 LAT (91) and Zone d'habitation de très faible densité 15 LAT (73).

The median parcel is built to a volume utilization of 10 %; half of the parcels lie between 5 % and 87 %. The canton median is 9 %, close to the level of Boussens.

Parcels built in the last 20 years reach a mean volume utilization of 111 % (71 parcels), higher than the 60 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone agricole 16 LAT910 %
Zone centrale 15 LAT9192 %
Zone d'habitation de très faible densité 15 LAT7379 %
Aire forestière 18 LAT670 %
Zone de desserte 15 LAT380 %
Zone mixte 15 LAT991 %
Zone de verdure 15 LAT70 %
Zone affectée à des besoins publics 15 LAT60 %
Zone d'activités économiques 15 LAT5100 %
Zone d'habitation de faible densité 15 LAT3123 %
Zone intermédiaire 18 LAT30 %
Zone de protection de la nature et du paysage 17 LAT10 %

Volume utilization (ratioV)

Of the 381 parcels with a value, half lie between 5 % and 87 %. The median is 10 % and the mean 53 %.

0 %300 %+

Share of parcels by range

  • below 50 %59 %
  • 50 % to below 100 %18 %
  • 100 % to below 150 %12 %
  • 150 % and above10 %

Floor-area ratio (GFZ)

Of the 381 parcels with a value, half lie between 0.04 and 0.37. The median is 0.09 and the mean 0.22.

0.003.00+

Share of parcels by range

  • below 0.5083 %
  • 0.50 to below 1.0013 %
  • 1.00 to below 1.502 %
  • 1.50 and above1 %

Building height

The parcel data has too few values for this measure here.

Number of floors

Of the 123 parcels with a value, half lie between 1.8 and 2.9. The median is 2.2 and the mean 2.3.

016+

Share of parcels by range

  • below 211 %
  • 2 to below 353 %
  • 3 to below 537 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years39460 %
Last 60 years167104 %
Last 40 years134111 %
Last 20 years71111 %
Last 15 years44114 %
Last 10 years26114 %
Last 5 years10104 %

Open the map at Boussens

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).