roomOpen the map

Tenero-Contra: observed built density

Municipality in the canton of Ticino · FSO no. 5131 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Ticino, so figures here may be incomplete.

Parcels
1’838

1 % of the canton

Municipal zones
43
Median utilization
8 %

Canton: 10 %

Switzerland: 10 %

Median GFZ
0.08

Canton: 0.09

Switzerland: 0.09

Median height
9.0 m

Canton: 8.7 m

Switzerland: 9.5 m

Median floors
2.0

Canton: 1.9

Switzerland: 2.3

About Tenero-Contra

Tenero-Contra is a municipality in the canton of Ticino. The parcel data lists 1’838 parcels in 43 municipal zone types. The zone types with the most parcels are Area boschiva (733), Zona residenziale estensiva (290) and Zona residenziale intensiva (114).

The median parcel is built to a volume utilization of 8 %; half of the parcels lie between 4 % and 72 %. The canton median is 10 %, so Tenero-Contra sits below it.

The median building height is 9.0 m at 2.0 floors, and the median floor-area ratio (GFZ) is 0.08. Parcels built in the last 20 years reach a mean volume utilization of 109 % (118 parcels), higher than the 47 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Area boschiva7330 %
Zona residenziale estensiva29068 %
Zona residenziale intensiva11476 %
Aree di recupero naturalistico e paesaggistico990 %
Zona residenziale estensiva particolare7680 %
Zona residenziale semi-intensiva6987 %
Nucleo tradizionale5870 %
Zona residenziale semi-estensiva5285 %
Zona residenziale-artigianale4287 %
Terreni sul territorio di Tenero Contra3373 %
Zona residenziale-commerciale intensiva3374 %
Zona dei campeggi2918 %
Other zones (31)210-

Volume utilization (ratioV)

Of the 1’804 parcels with a value, half lie between 4 % and 72 %. The median is 8 % and the mean 40 %.

0 %300 %+

Share of parcels by range

  • below 50 %70 %
  • 50 % to below 100 %15 %
  • 100 % to below 150 %10 %
  • 150 % and above6 %

Floor-area ratio (GFZ)

Of the 1’804 parcels with a value, half lie between 0.04 and 0.45. The median is 0.08 and the mean 0.27.

0.003.00+

Share of parcels by range

  • below 0.5077 %
  • 0.50 to below 1.0014 %
  • 1.00 to below 1.506 %
  • 1.50 and above3 %

Building height

Of the 655 parcels with a value, half lie between 7.3 m and 11.1 m. The median is 9.0 m and the mean 9.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m34 %
  • 8 m to below 12 m49 %
  • 12 m to below 20 m17 %
  • 20 m and above< 1 %

Number of floors

Of the 695 parcels with a value, half lie between 1.5 and 2.5. The median is 2.0 and the mean 2.2.

016+

Share of parcels by range

  • below 224 %
  • 2 to below 353 %
  • 3 to below 519 %
  • 5 and above4 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’83847 %
Last 60 years409120 %
Last 40 years274117 %
Last 20 years118109 %
Last 15 years85109 %
Last 10 years40124 %
Last 5 years13104 %

Open the map at Tenero-Contra

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).