roomOpen the map

Sant'Antonino: observed built density

Municipality in the canton of Ticino · FSO no. 5017 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Ticino, so figures here may be incomplete.

Parcels
1’496

1 % of the canton

Municipal zones
22
Median utilization
22 %

Canton: 10 %

Switzerland: 10 %

Median GFZ
0.10

Canton: 0.09

Switzerland: 0.09

Median height
8.0 m

Canton: 8.7 m

Switzerland: 9.5 m

Median floors
1.8

Canton: 1.9

Switzerland: 2.3

About Sant'Antonino

Sant'Antonino is a municipality in the canton of Ticino. The parcel data lists 1’496 parcels in 22 municipal zone types. The zone types with the most parcels are Zona residenziale intensiva (334), Bosco (286) and Zona residenziale estensiva (275).

The median parcel is built to a volume utilization of 22 %; half of the parcels lie between 5 % and 91 %. The canton median is 10 %, so Sant'Antonino sits above it.

The median building height is 8.0 m at 1.8 floors, and the median floor-area ratio (GFZ) is 0.10. Parcels built in the last 20 years reach a mean volume utilization of 113 % (128 parcels), higher than the 67 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zona residenziale intensiva33474 %
Bosco2860 %
Zona residenziale estensiva27571 %
Zona agricola2520 %
Zona nucleo164136 %
PRI - comparto industriale-commerciale671 %
Acque290 %
Zona mista (artigianale e residenziale)2652 %
Strada di servizio150 %
Zona per attrezzature d'interesse pubblico100 %
Posteggi pubblici80 %
Zona residenziale intensiva computabile non edificabile771 %
Other zones (10)23-

Volume utilization (ratioV)

Of the 1’478 parcels with a value, half lie between 5 % and 91 %. The median is 22 % and the mean 57 %.

0 %300 %+

Share of parcels by range

  • below 50 %56 %
  • 50 % to below 100 %23 %
  • 100 % to below 150 %13 %
  • 150 % and above8 %

Floor-area ratio (GFZ)

Of the 1’478 parcels with a value, half lie between 0.05 and 0.51. The median is 0.10 and the mean 0.31.

0.003.00+

Share of parcels by range

  • below 0.5074 %
  • 0.50 to below 1.0019 %
  • 1.00 to below 1.503 %
  • 1.50 and above3 %

Building height

Of the 769 parcels with a value, half lie between 6.7 m and 9.4 m. The median is 8.0 m and the mean 8.2 m.

0 m60 m+

Share of parcels by range

  • below 8 m50 %
  • 8 m to below 12 m45 %
  • 12 m to below 20 m4 %
  • 20 m and above0 %

Number of floors

Of the 815 parcels with a value, half lie between 1.2 and 2.3. The median is 1.8 and the mean 1.9.

016+

Share of parcels by range

  • below 233 %
  • 2 to below 350 %
  • 3 to below 516 %
  • 5 and above< 1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’49667 %
Last 60 years56096 %
Last 40 years39799 %
Last 20 years128113 %
Last 15 years91123 %
Last 10 years56134 %
Last 5 years25146 %

Open the map at Sant'Antonino

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).