roomOpen the map

Ronco sopra Ascona: observed built density

Municipality in the canton of Ticino · FSO no. 5125 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Ticino, so figures here may be incomplete.

Parcels
1’853

1 % of the canton

Municipal zones
30
Median utilization
9 %

Canton: 10 %

Switzerland: 10 %

Median GFZ
0.08

Canton: 0.09

Switzerland: 0.09

Median height
10.4 m

Canton: 8.7 m

Switzerland: 9.5 m

Median floors
1.9

Canton: 1.9

Switzerland: 2.3

About Ronco sopra Ascona

Ronco sopra Ascona is a municipality in the canton of Ticino. The parcel data lists 1’853 parcels in 30 municipal zone types. The zone types with the most parcels are Zona residenziale estensiva RE (612), Bosco (572) and Nucleo tradizionale NV (155).

The median parcel is built to a volume utilization of 9 %; half of the parcels lie between 5 % and 110 %. The canton median is 10 %, close to the level of Ronco sopra Ascona.

The median building height is 10.4 m at 1.9 floors, and the median floor-area ratio (GFZ) is 0.08.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zona residenziale estensiva RE61296 %
Bosco5720 %
Nucleo tradizionale NV155124 %
Area agricola - Pascolo8526 %
Area agricola - Comparto alpestre680 %
Zona residenziale speciale a lago Rs4511 %
Zona residenziale semi-intensiva RSI4257 %
Vuoto pianificatorio380 %
Territorio senza destinazione specifica SDS31336 %
Zona di protezione della natura250 %
Zona per attrezzature pubbliche AP240 %
Corso d'acqua, riale220 %
Other zones (18)134-

Volume utilization (ratioV)

Of the 1’825 parcels with a value, half lie between 5 % and 110 %. The median is 9 % and the mean 68 %.

0 %300 %+

Share of parcels by range

  • below 50 %62 %
  • 50 % to below 100 %11 %
  • 100 % to below 150 %9 %
  • 150 % and above18 %

Floor-area ratio (GFZ)

Of the 1’825 parcels with a value, half lie between 0.04 and 0.50. The median is 0.08 and the mean 0.38.

0.003.00+

Share of parcels by range

  • below 0.5075 %
  • 0.50 to below 1.0013 %
  • 1.00 to below 1.505 %
  • 1.50 and above7 %

Building height

Of the 805 parcels with a value, half lie between 7.6 m and 12.7 m. The median is 10.4 m and the mean 10.4 m.

0 m60 m+

Share of parcels by range

  • below 8 m28 %
  • 8 m to below 12 m41 %
  • 12 m to below 20 m30 %
  • 20 m and above1 %

Number of floors

Of the 866 parcels with a value, half lie between 1.2 and 2.5. The median is 1.9 and the mean 2.0.

016+

Share of parcels by range

  • below 234 %
  • 2 to below 342 %
  • 3 to below 523 %
  • 5 and above1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’85373 %
Last 60 years328166 %
Last 40 years128137 %
Last 20 years25127 %
Last 15 years14134 %
Last 10 years3139 %
Last 5 years145 %

Open the map at Ronco sopra Ascona

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).