roomOpen the map

Lumino: observed built density

Municipality in the canton of Ticino · FSO no. 5010 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Ticino, so figures here may be incomplete.

Parcels
1’534

1 % of the canton

Municipal zones
29
Median utilization
9 %

Canton: 10 %

Switzerland: 10 %

Median GFZ
0.09

Canton: 0.09

Switzerland: 0.09

Median height
8.3 m

Canton: 8.7 m

Switzerland: 9.5 m

Median floors
1.8

Canton: 1.9

Switzerland: 2.3

About Lumino

Lumino is a municipality in the canton of Ticino. The parcel data lists 1’534 parcels in 29 municipal zone types. The zone types with the most parcels are Altri terreni idonei all'agricoltura (324), Zona forestale (267) and Zona intensiva per l’abitazione R3 (267).

The median parcel is built to a volume utilization of 9 %; half of the parcels lie between 5 % and 87 %. The canton median is 10 %, close to the level of Lumino.

The median building height is 8.3 m at 1.8 floors, and the median floor-area ratio (GFZ) is 0.09. Parcels built in the last 20 years reach a mean volume utilization of 111 % (96 parcels), lower than the 549 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Altri terreni idonei all'agricoltura3240 %
Zona forestale2670 %
Zona intensiva per l’abitazione R326764 %
Zona del nucleo22577 %
Zona intensiva per l’abitazione R3+22471 %
Strada di servizio580 %
Zona per la produzione di beni3472 %
Zona intensiva per l’abitazione R52249 %
Corso d'acqua190 %
Strada prevalentemente pedonale190 %
Zona senza destinazione specifica150 %
Vuoto pianificatorio140 %
Other zones (17)46-

Volume utilization (ratioV)

Of the 1’511 parcels with a value, half lie between 5 % and 87 %. The median is 9 % and the mean 531 %.

0 %300 %+

Share of parcels by range

  • below 50 %61 %
  • 50 % to below 100 %17 %
  • 100 % to below 150 %10 %
  • 150 % and above12 %

Floor-area ratio (GFZ)

Of the 1’511 parcels with a value, half lie between 0.04 and 0.57. The median is 0.09 and the mean 0.40.

0.003.00+

Share of parcels by range

  • below 0.5072 %
  • 0.50 to below 1.0013 %
  • 1.00 to below 1.506 %
  • 1.50 and above8 %

Building height

Of the 690 parcels with a value, half lie between 6.6 m and 10.2 m. The median is 8.3 m and the mean 8.4 m.

0 m60 m+

Share of parcels by range

  • below 8 m46 %
  • 8 m to below 12 m47 %
  • 12 m to below 20 m7 %
  • 20 m and above0 %

Number of floors

Of the 690 parcels with a value, half lie between 1.2 and 2.4. The median is 1.8 and the mean 1.9.

016+

Share of parcels by range

  • below 236 %
  • 2 to below 343 %
  • 3 to below 521 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’534549 %
Last 60 years384147 %
Last 40 years260147 %
Last 20 years96111 %
Last 15 years58119 %
Last 10 years37126 %
Last 5 years15134 %

Open the map at Lumino

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).