roomOpen the map

Arogno: observed built density

Municipality in the canton of Ticino · FSO no. 5144 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Ticino, so figures here may be incomplete.

Parcels
1’332

1 % of the canton

Municipal zones
22
Median utilization
10 %

Canton: 10 %

Switzerland: 10 %

Median GFZ
0.08

Canton: 0.09

Switzerland: 0.09

Median height
9.5 m

Canton: 8.7 m

Switzerland: 9.5 m

Median floors
1.9

Canton: 1.9

Switzerland: 2.3

About Arogno

Arogno is a municipality in the canton of Ticino. The parcel data lists 1’332 parcels in 22 municipal zone types. The zone types with the most parcels are Zona forestale (350), Altri terreni idonei all'utilizzazione agricola (342) and Nucleo di villaggio (294).

The median parcel is built to a volume utilization of 10 %; half of the parcels lie between 5 % and 157 %. The canton median is 10 %, close to the level of Arogno.

The median building height is 9.5 m at 1.9 floors, and the median floor-area ratio (GFZ) is 0.08. Parcels built in the last 20 years reach a mean volume utilization of 121 % (39 parcels), lower than the 165 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zona forestale3500 %
Altri terreni idonei all'utilizzazione agricola3422 %
Nucleo di villaggio294376 %
Zone residenziali semi-intensive20874 %
Zona turistico residenziale2592 %
Zona residenziale estensiva15100 %
Corsi d'acqua140 %
Edifici di interesse pubblico di altri enti1437 %
Attrezzature di interesse pubblico di proprietà comunale130 %
Strada di servizio110 %
Zona residenziale speciale 11127 %
Territorio non edificabile954 %
Other zones (10)26-

Volume utilization (ratioV)

Of the 1’309 parcels with a value, half lie between 5 % and 157 %. The median is 10 % and the mean 151 %.

0 %300 %+

Share of parcels by range

  • below 50 %58 %
  • 50 % to below 100 %9 %
  • 100 % to below 150 %8 %
  • 150 % and above25 %

Floor-area ratio (GFZ)

Of the 1’309 parcels with a value, half lie between 0.04 and 0.50. The median is 0.08 and the mean 0.55.

0.003.00+

Share of parcels by range

  • below 0.5075 %
  • 0.50 to below 1.009 %
  • 1.00 to below 1.503 %
  • 1.50 and above14 %

Building height

Of the 634 parcels with a value, half lie between 7.6 m and 11.8 m. The median is 9.5 m and the mean 9.7 m.

0 m60 m+

Share of parcels by range

  • below 8 m29 %
  • 8 m to below 12 m48 %
  • 12 m to below 20 m23 %
  • 20 m and above0 %

Number of floors

Of the 554 parcels with a value, half lie between 1.3 and 2.5. The median is 1.9 and the mean 1.9.

016+

Share of parcels by range

  • below 232 %
  • 2 to below 344 %
  • 3 to below 524 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’332165 %
Last 60 years197183 %
Last 40 years125145 %
Last 20 years39121 %
Last 15 years2696 %
Last 10 years14104 %
Last 5 years692 %

Open the map at Arogno

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).