Schlatt (TG): observed built density
Municipality in the canton of Thurgau · FSO no. 4546 · Parcel data as of July 2025
- Parcels
- 1’525
1 % of the canton
- Municipal zones
- 22
- Median utilization
- 10 %
Canton: 24 %
Switzerland: 10 %
- Median GFZ
- 0.09
Canton: 0.10
Switzerland: 0.09
- Median height
- 9.5 m
Canton: 9.7 m
Switzerland: 9.5 m
- Median floors
- 2.1
Canton: 2.3
Switzerland: 2.3
About Schlatt (TG)
Schlatt (TG) is a municipality in the canton of Thurgau. The parcel data lists 1’525 parcels in 22 municipal zone types. The zone types with the most parcels are Landwirtschaftszone (323), Wohnzone 2 (300) and Dorfzone (258).
The median parcel is built to a volume utilization of 10 %; half of the parcels lie between 5 % and 96 %. The canton median is 24 %, so Schlatt (TG) sits below it.
The median building height is 9.5 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.09. Parcels built in the last 20 years reach a mean volume utilization of 102 % (197 parcels), higher than the 56 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Landwirtschaftszone | 323 | 0 % |
| Wohnzone 2 | 300 | 93 % |
| Dorfzone | 258 | 100 % |
| Strassenflächen ausserhalb von Bauzonen | 200 | 0 % |
| Wald | 125 | 0 % |
| Wohn- und Arbeitszone 2 | 90 | 77 % |
| Strassen und Wege innerhalb von Bauzonen | 78 | 0 % |
| Naturschutzzone im Wald | 32 | 0 % |
| Wohnzone 1 | 28 | 90 % |
| Naturschutzzone | 18 | 0 % |
| Arbeitszone | 17 | 0 % |
| Dorfzone Klosterareal | 13 | 55 % |
| Other zones (10) | 43 | - |
Volume utilization (ratioV)
Of the 1’505 parcels with a value, half lie between 5 % and 96 %. The median is 10 % and the mean 54 %.
Share of parcels by range
- below 50 %59 %
- 50 % to below 100 %17 %
- 100 % to below 150 %14 %
- 150 % and above9 %
Floor-area ratio (GFZ)
Of the 1’504 parcels with a value, half lie between 0.04 and 0.43. The median is 0.09 and the mean 0.25.
Share of parcels by range
- below 0.5080 %
- 0.50 to below 1.0015 %
- 1.00 to below 1.504 %
- 1.50 and above1 %
Building height
Of the 713 parcels with a value, half lie between 8.0 m and 11.1 m. The median is 9.5 m and the mean 9.3 m.
Share of parcels by range
- below 8 m25 %
- 8 m to below 12 m63 %
- 12 m to below 20 m12 %
- 20 m and above0 %
Number of floors
Of the 488 parcels with a value, half lie between 1.8 and 2.5. The median is 2.1 and the mean 2.2.
Share of parcels by range
- below 27 %
- 2 to below 370 %
- 3 to below 524 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’525 | 56 % |
| Last 60 years | 517 | 110 % |
| Last 40 years | 414 | 110 % |
| Last 20 years | 197 | 102 % |
| Last 15 years | 154 | 103 % |
| Last 10 years | 97 | 109 % |
| Last 5 years | 34 | 102 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).