Amlikon-Bissegg: observed built density
Municipality in the canton of Thurgau · FSO no. 4881 · Parcel data as of July 2025
- Parcels
- 1’814
1 % of the canton
- Municipal zones
- 17
- Median utilization
- 7 %
Canton: 24 %
Switzerland: 10 %
- Median GFZ
- 0.07
Canton: 0.10
Switzerland: 0.09
- Median height
- 10.2 m
Canton: 9.7 m
Switzerland: 9.5 m
- Median floors
- 2.0
Canton: 2.3
Switzerland: 2.3
About Amlikon-Bissegg
Amlikon-Bissegg is a municipality in the canton of Thurgau. The parcel data lists 1’814 parcels in 17 municipal zone types. The zone types with the most parcels are Landwirtschaftzone (586), Wald (412) and Dorfzone (231).
The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 4 % and 66 %. The canton median is 24 %, so Amlikon-Bissegg sits below it.
The median building height is 10.2 m at 2.0 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 124 % (171 parcels), higher than the 44 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Landwirtschaftzone | 586 | 0 % |
| Wald | 412 | 0 % |
| Dorfzone | 231 | 104 % |
| Strassen ausserhalb Bauzone | 226 | 0 % |
| Wohnzone W2a | 164 | 91 % |
| Strasse innerhalb Bauzone | 64 | 0 % |
| Wohn- und Arbeitszone WA2 | 41 | 80 % |
| Wohn- und Arbeitszone WA3 | 29 | 97 % |
| Freihaltezone | 21 | 0 % |
| Gewässer | 19 | 0 % |
| Arbeitszone Gewerbe | 7 | 128 % |
| Weilerzone | 4 | 100 % |
| Other zones (5) | 10 | - |
Volume utilization (ratioV)
Of the 1’791 parcels with a value, half lie between 4 % and 66 %. The median is 7 % and the mean 40 %.
Share of parcels by range
- below 50 %72 %
- 50 % to below 100 %12 %
- 100 % to below 150 %9 %
- 150 % and above7 %
Floor-area ratio (GFZ)
Of the 1’790 parcels with a value, half lie between 0.03 and 0.21. The median is 0.07 and the mean 0.15.
Share of parcels by range
- below 0.5087 %
- 0.50 to below 1.0011 %
- 1.00 to below 1.502 %
- 1.50 and above< 1 %
Building height
Of the 551 parcels with a value, half lie between 8.4 m and 11.6 m. The median is 10.2 m and the mean 9.9 m.
Share of parcels by range
- below 8 m19 %
- 8 m to below 12 m63 %
- 12 m to below 20 m18 %
- 20 m and above0 %
Number of floors
Of the 405 parcels with a value, half lie between 1.6 and 2.4. The median is 2.0 and the mean 2.1.
Share of parcels by range
- below 217 %
- 2 to below 362 %
- 3 to below 521 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’814 | 44 % |
| Last 60 years | 406 | 121 % |
| Last 40 years | 329 | 120 % |
| Last 20 years | 171 | 124 % |
| Last 15 years | 108 | 130 % |
| Last 10 years | 79 | 136 % |
| Last 5 years | 33 | 123 % |
Open the map at Amlikon-Bissegg
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).