Rheineck: observed built density
Municipality in the canton of St. Gallen · FSO no. 3235 · Parcel data as of July 2025
- Parcels
- 1’066
1 % of the canton
- Municipal zones
- 19
- Median utilization
- 85 %
Canton: 58 %
Switzerland: 10 %
- Median GFZ
- 0.48
Canton: 0.28
Switzerland: 0.09
- Median height
- 10.2 m
Canton: 9.6 m
Switzerland: 9.5 m
- Median floors
- 2.5
Canton: 2.4
Switzerland: 2.3
About Rheineck
Rheineck is a municipality in the canton of St. Gallen. The parcel data lists 1’066 parcels in 19 municipal zone types. The zone types with the most parcels are BauG Wohnzone W2 (329), BauG Kernzone K4 (168) and BauG Wohnzone W2a (143).
The median parcel is built to a volume utilization of 85 %; half of the parcels lie between 43 % and 128 %. The canton median is 58 %, so Rheineck sits above it.
The median building height is 10.2 m at 2.5 floors, and the median floor-area ratio (GFZ) is 0.48. Parcels built in the last 20 years reach a mean volume utilization of 107 % (107 parcels), lower than the 139 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| BauG Wohnzone W2 | 329 | 91 % |
| BauG Kernzone K4 | 168 | 96 % |
| BauG Wohnzone W2a | 143 | 80 % |
| BauG Landwirtschaftszone | 88 | 0 % |
| BauG Wohn-Gewerbezone WG2 | 72 | 126 % |
| BauG Wohnzone W3 | 48 | 96 % |
| BauG Industriezone IA | 37 | 81 % |
| Hinweis.Verkehrsflaeche iB | 36 | 0 % |
| BauG Wohn-Gewerbezone WG3 | 30 | 113 % |
| BauG Zone für öffentliche Bauten und Anlagen | 27 | 1’099 % |
| BauG Grünzone Naturschutz ausserhalb Baugebiet | 22 | 0 % |
| BauG Gewerbe-Industriezone GI A | 17 | 91 % |
| Other zones (7) | 49 | - |
Volume utilization (ratioV)
Of the 1’044 parcels with a value, half lie between 43 % and 128 %. The median is 85 % and the mean 130 %.
Share of parcels by range
- below 50 %27 %
- 50 % to below 100 %34 %
- 100 % to below 150 %22 %
- 150 % and above17 %
Floor-area ratio (GFZ)
Of the 1’044 parcels with a value, half lie between 0.20 and 0.83. The median is 0.48 and the mean 0.62.
Share of parcels by range
- below 0.5052 %
- 0.50 to below 1.0030 %
- 1.00 to below 1.509 %
- 1.50 and above8 %
Building height
Of the 822 parcels with a value, half lie between 8.5 m and 12.4 m. The median is 10.2 m and the mean 10.5 m.
Share of parcels by range
- below 8 m17 %
- 8 m to below 12 m55 %
- 12 m to below 20 m28 %
- 20 m and above< 1 %
Number of floors
Of the 658 parcels with a value, half lie between 1.9 and 3.2. The median is 2.5 and the mean 2.7.
Share of parcels by range
- below 26 %
- 2 to below 344 %
- 3 to below 546 %
- 5 and above4 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’066 | 139 % |
| Last 60 years | 426 | 144 % |
| Last 40 years | 288 | 153 % |
| Last 20 years | 107 | 107 % |
| Last 15 years | 77 | 110 % |
| Last 10 years | 43 | 105 % |
| Last 5 years | 15 | 99 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).