Muolen: observed built density
Municipality in the canton of St. Gallen · FSO no. 3202 · Parcel data as of July 2025
- Parcels
- 894
< 1 % of the canton
- Municipal zones
- 13
- Median utilization
- 9 %
Canton: 58 %
Switzerland: 10 %
- Median GFZ
- 0.08
Canton: 0.28
Switzerland: 0.09
- Median height
- 10.3 m
Canton: 9.6 m
Switzerland: 9.5 m
- Median floors
- 2.3
Canton: 2.4
Switzerland: 2.3
About Muolen
Muolen is a municipality in the canton of St. Gallen. The parcel data lists 894 parcels in 13 municipal zone types. The zone types with the most parcels are BauG Landwirtschaftszone (485), Hinweis.Wald (138) and BauG Wohnzone W2a (76).
The median parcel is built to a volume utilization of 9 %; half of the parcels lie between 4 % and 96 %. The canton median is 58 %, so Muolen sits below it.
The median building height is 10.3 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.08. Parcels built in the last 20 years reach a mean volume utilization of 158 % (99 parcels), higher than the 85 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| BauG Landwirtschaftszone | 485 | 0 % |
| Hinweis.Wald | 138 | 0 % |
| BauG Wohnzone W2a | 76 | 91 % |
| BauG Wohnzone W2b | 55 | 98 % |
| BauG Kernzone K2 | 48 | 94 % |
| BauG Wohn-Gewerbezone WG2 | 30 | 89 % |
| BauG Gewerbe-Industriezone GI A | 14 | 143 % |
| BauG Weilerzone | 14 | 90 % |
| Hinweis.Verkehrsflaeche aB | 14 | 0 % |
| Hinweis.Verkehrsflaeche iB | 7 | 0 % |
| BauG Zone für öffentliche Bauten und Anlagen | 6 | 141 % |
| BauG übriges Gemeindegebiet allg | 4 | 0 % |
| Other zones (1) | 3 | - |
Volume utilization (ratioV)
Of the 880 parcels with a value, half lie between 4 % and 96 %. The median is 9 % and the mean 79 %.
Share of parcels by range
- below 50 %61 %
- 50 % to below 100 %16 %
- 100 % to below 150 %10 %
- 150 % and above13 %
Floor-area ratio (GFZ)
Of the 880 parcels with a value, half lie between 0.04 and 0.33. The median is 0.08 and the mean 0.17.
Share of parcels by range
- below 0.5087 %
- 0.50 to below 1.0011 %
- 1.00 to below 1.501 %
- 1.50 and above< 1 %
Building height
Of the 377 parcels with a value, half lie between 8.3 m and 11.9 m. The median is 10.3 m and the mean 10.2 m.
Share of parcels by range
- below 8 m21 %
- 8 m to below 12 m56 %
- 12 m to below 20 m23 %
- 20 m and above0 %
Number of floors
Of the 234 parcels with a value, half lie between 1.8 and 2.9. The median is 2.3 and the mean 2.4.
Share of parcels by range
- below 27 %
- 2 to below 356 %
- 3 to below 537 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 894 | 85 % |
| Last 60 years | 277 | 152 % |
| Last 40 years | 185 | 148 % |
| Last 20 years | 99 | 158 % |
| Last 15 years | 61 | 168 % |
| Last 10 years | 35 | 178 % |
| Last 5 years | 9 | 157 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).