roomOpen the map

Berneck: observed built density

Municipality in the canton of St. Gallen · FSO no. 3233 · Parcel data as of July 2025

Parcels
2’248

1 % of the canton

Municipal zones
18
Median utilization
39 %

Canton: 58 %

Switzerland: 10 %

Median GFZ
0.11

Canton: 0.28

Switzerland: 0.09

Median height
9.5 m

Canton: 9.6 m

Switzerland: 9.5 m

Median floors
2.4

Canton: 2.4

Switzerland: 2.3

About Berneck

Berneck is a municipality in the canton of St. Gallen. The parcel data lists 2’248 parcels in 18 municipal zone types. The zone types with the most parcels are BauG Wohnzone W2b (545), BauG Landwirtschaftszone (506) and Hinweis.Wald (369).

The median parcel is built to a volume utilization of 39 %; half of the parcels lie between 5 % and 100 %. The canton median is 58 %, so Berneck sits below it.

The median building height is 9.5 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.11. Parcels built in the last 20 years reach a mean volume utilization of 116 % (235 parcels), higher than the 65 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
BauG Wohnzone W2b54588 %
BauG Landwirtschaftszone5060 %
Hinweis.Wald3690 %
BauG übriges Gemeindegebiet Strasse Weg1550 %
BauG Wohnzone WE15387 %
BauG Wohn-Gewerbezone WG2136113 %
BauG Wohn-Gewerbezone WG310368 %
BauG Kernzone K375158 %
BauG Wohnzone W353132 %
BauG Zone für öffentliche Bauten und Anlagen39137 %
BauG übriges Gemeindegebiet allg320 %
BauG Gewerbe-Industriezone GI B24110 %
Other zones (6)58-

Volume utilization (ratioV)

Of the 2’225 parcels with a value, half lie between 5 % and 100 %. The median is 39 % and the mean 62 %.

0 %300 %+

Share of parcels by range

  • below 50 %52 %
  • 50 % to below 100 %23 %
  • 100 % to below 150 %14 %
  • 150 % and above12 %

Floor-area ratio (GFZ)

Of the 2’225 parcels with a value, half lie between 0.05 and 0.48. The median is 0.11 and the mean 0.30.

0.003.00+

Share of parcels by range

  • below 0.5077 %
  • 0.50 to below 1.0016 %
  • 1.00 to below 1.505 %
  • 1.50 and above2 %

Building height

Of the 1’158 parcels with a value, half lie between 8.1 m and 11.3 m. The median is 9.5 m and the mean 9.8 m.

0 m60 m+

Share of parcels by range

  • below 8 m23 %
  • 8 m to below 12 m61 %
  • 12 m to below 20 m16 %
  • 20 m and above< 1 %

Number of floors

Of the 924 parcels with a value, half lie between 1.9 and 3.0. The median is 2.4 and the mean 2.4.

016+

Share of parcels by range

  • below 26 %
  • 2 to below 349 %
  • 3 to below 544 %
  • 5 and above< 1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years2’24865 %
Last 60 years711113 %
Last 40 years472120 %
Last 20 years235116 %
Last 15 years130122 %
Last 10 years51139 %
Last 5 years31133 %

Open the map at Berneck

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).