roomOpen the map

Céligny: observed built density

Municipality in the canton of Geneva · FSO no. 6610 · Parcel data as of July 2025

Parcels
454

1 % of the canton

Municipal zones
9
Median utilization
9 %

Canton: 49 %

Switzerland: 10 %

Median GFZ
0.07

Canton: 0.23

Switzerland: 0.09

Median height
9.6 m

Canton: 9.3 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.4

Switzerland: 2.3

About Céligny

Céligny is a municipality in the canton of Geneva. The parcel data lists 454 parcels in 9 municipal zone types. The zone types with the most parcels are Zone agricole (231), Zone de développement 4B protégée (106) and Zone de développement 5 (48).

The median parcel is built to a volume utilization of 9 %; half of the parcels lie between 4 % and 95 %. The canton median is 49 %, so Céligny sits below it.

The median building height is 9.6 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 100 % (47 parcels), higher than the 71 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone agricole2310 %
Zone de développement 4B protégée10689 %
Zone de développement 54862 %
Zone des bois et forêts470 %
Zone de développement 396 %
Zone ferroviaire60 %
Zone de verdure50 %
Zone des eaux 17 LAT10 %
Zone des eaux et des rives1100 %

Volume utilization (ratioV)

Of the 446 parcels with a value, half lie between 4 % and 95 %. The median is 9 % and the mean 64 %.

0 %300 %+

Share of parcels by range

  • below 50 %64 %
  • 50 % to below 100 %13 %
  • 100 % to below 150 %8 %
  • 150 % and above15 %

Floor-area ratio (GFZ)

Of the 446 parcels with a value, half lie between 0.04 and 0.20. The median is 0.07 and the mean 0.28.

0.003.00+

Share of parcels by range

  • below 0.5085 %
  • 0.50 to below 1.005 %
  • 1.00 to below 1.503 %
  • 1.50 and above7 %

Building height

Of the 191 parcels with a value, half lie between 7.5 m and 11.3 m. The median is 9.6 m and the mean 9.3 m.

0 m60 m+

Share of parcels by range

  • below 8 m29 %
  • 8 m to below 12 m56 %
  • 12 m to below 20 m15 %
  • 20 m and above0 %

Number of floors

Of the 155 parcels with a value, half lie between 1.4 and 2.8. The median is 2.1 and the mean 2.1.

016+

Share of parcels by range

  • below 229 %
  • 2 to below 336 %
  • 3 to below 535 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years45471 %
Last 60 years102152 %
Last 40 years75127 %
Last 20 years47100 %
Last 15 years33104 %
Last 10 years25106 %
Last 5 years12113 %

Open the map at Céligny

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).