roomOpen the map

Walperswil: observed built density

Municipality in the canton of Bern · FSO no. 754 · Parcel data as of July 2025

Parcels
713

< 1 % of the canton

Municipal zones
17
Median utilization
10 %

Canton: 32 %

Switzerland: 10 %

Median GFZ
0.09

Canton: 0.09

Switzerland: 0.09

Median height
9.1 m

Canton: 9.5 m

Switzerland: 9.5 m

Median floors
2.0

Canton: 2.3

Switzerland: 2.3

About Walperswil

Walperswil is a municipality in the canton of Bern. The parcel data lists 713 parcels in 17 municipal zone types. The zone types with the most parcels are Landwirtschaftszone A (294), Wohnzone 2, Geschosse (163) and Kernzone (159).

The median parcel is built to a volume utilization of 10 %; half of the parcels lie between 5 % and 111 %. The canton median is 32 %, so Walperswil sits below it.

The median building height is 9.1 m at 2.0 floors, and the median floor-area ratio (GFZ) is 0.09. Parcels built in the last 20 years reach a mean volume utilization of 121 % (80 parcels), higher than the 112 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaftszone A2940 %
Wohnzone 2, Geschosse163102 %
Kernzone159100 %
Wohn- u. Gewerbezone4293 %
Abbau- und Ablagerungszone210 %
Übriges Gebiet130 %
Intensivlandwirtschaftszone ILW40 %
Landwirtschaftszone C431 %
Gewerbezone2100 %
Zone für öffentliche Nutzung Nr. 1 "Schule, Mehrzweckhalle mit Aussensportanlage2100 %
Zone für öffentliche Nutzung Nr. 5 "Friedhof"250 %
Zone für öffentliche Nutzung Nr. 6 "Spiel-, Sport- und Freizeitbereich"250 %
Other zones (5)5-

Volume utilization (ratioV)

Of the 695 parcels with a value, half lie between 5 % and 111 %. The median is 10 % and the mean 80 %.

0 %300 %+

Share of parcels by range

  • below 50 %54 %
  • 50 % to below 100 %16 %
  • 100 % to below 150 %14 %
  • 150 % and above15 %

Floor-area ratio (GFZ)

Of the 695 parcels with a value, half lie between 0.05 and 0.40. The median is 0.09 and the mean 0.23.

0.003.00+

Share of parcels by range

  • below 0.5082 %
  • 0.50 to below 1.0015 %
  • 1.00 to below 1.502 %
  • 1.50 and above1 %

Building height

Of the 339 parcels with a value, half lie between 7.4 m and 11.2 m. The median is 9.1 m and the mean 9.2 m.

0 m60 m+

Share of parcels by range

  • below 8 m33 %
  • 8 m to below 12 m50 %
  • 12 m to below 20 m18 %
  • 20 m and above0 %

Number of floors

Of the 229 parcels with a value, half lie between 1.7 and 2.4. The median is 2.0 and the mean 2.1.

016+

Share of parcels by range

  • below 211 %
  • 2 to below 371 %
  • 3 to below 517 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years713112 %
Last 60 years266163 %
Last 40 years206150 %
Last 20 years80121 %
Last 15 years56124 %
Last 10 years28110 %
Last 5 years1084 %

Open the map at Walperswil

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).