roomOpen the map

Utzenstorf: observed built density

Municipality in the canton of Bern · FSO no. 552 · Parcel data as of July 2025

Parcels
2’195

< 1 % of the canton

Municipal zones
27
Median utilization
43 %

Canton: 32 %

Switzerland: 10 %

Median GFZ
0.14

Canton: 0.09

Switzerland: 0.09

Median height
9.1 m

Canton: 9.5 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.3

Switzerland: 2.3

About Utzenstorf

Utzenstorf is a municipality in the canton of Bern. The parcel data lists 2’195 parcels in 27 municipal zone types. The zone types with the most parcels are W2 Wohnzone zweigeschossig (784), Landwirtschaftszone (584) and WG2 Wohn- und Gewerbezone zweigeschossig (386).

The median parcel is built to a volume utilization of 43 %; half of the parcels lie between 5 % and 98 %. The canton median is 32 %, so Utzenstorf sits above it.

The median building height is 9.1 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.14. Parcels built in the last 20 years reach a mean volume utilization of 120 % (233 parcels), lower than the 178 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
W2 Wohnzone zweigeschossig78485 %
Landwirtschaftszone5840 %
WG2 Wohn- und Gewerbezone zweigeschossig38678 %
uebriges Gebiet2680 %
W3 Wohnzone dreigeschossig4851 %
WG3 Wohn- und Gewerbezone dreigeschossig2939 %
Arbeitszone 12711 %
Arbeitszone 21564 %
Grünzone90 %
Arbeitszone 3828 %
ZöN A (Zone für öffentliche Nutzung)633 %
ZöN C (Zone für öffentliche Nutzung)40 %
Other zones (15)27-

Volume utilization (ratioV)

Of the 2’163 parcels with a value, half lie between 5 % and 98 %. The median is 43 % and the mean 77 %.

0 %300 %+

Share of parcels by range

  • below 50 %51 %
  • 50 % to below 100 %25 %
  • 100 % to below 150 %14 %
  • 150 % and above10 %

Floor-area ratio (GFZ)

Of the 2’163 parcels with a value, half lie between 0.05 and 0.43. The median is 0.14 and the mean 0.26.

0.003.00+

Share of parcels by range

  • below 0.5081 %
  • 0.50 to below 1.0016 %
  • 1.00 to below 1.503 %
  • 1.50 and above1 %

Building height

Of the 1’152 parcels with a value, half lie between 7.6 m and 10.8 m. The median is 9.1 m and the mean 9.3 m.

0 m60 m+

Share of parcels by range

  • below 8 m30 %
  • 8 m to below 12 m57 %
  • 12 m to below 20 m13 %
  • 20 m and above< 1 %

Number of floors

Of the 811 parcels with a value, half lie between 1.7 and 2.6. The median is 2.1 and the mean 2.2.

016+

Share of parcels by range

  • below 213 %
  • 2 to below 361 %
  • 3 to below 526 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years2’195178 %
Last 60 years811130 %
Last 40 years580146 %
Last 20 years233120 %
Last 15 years153131 %
Last 10 years83131 %
Last 5 years38120 %

Open the map at Utzenstorf

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).