Ringgenberg (BE): observed built density
Municipality in the canton of Bern · FSO no. 590 · Parcel data as of July 2025
- Parcels
- 1’630
< 1 % of the canton
- Municipal zones
- 24
- Median utilization
- 57 %
Canton: 32 %
Switzerland: 10 %
- Median GFZ
- 0.24
Canton: 0.09
Switzerland: 0.09
- Median height
- 8.6 m
Canton: 9.5 m
Switzerland: 9.5 m
- Median floors
- 2.1
Canton: 2.3
Switzerland: 2.3
About Ringgenberg (BE)
Ringgenberg (BE) is a municipality in the canton of Bern. The parcel data lists 1’630 parcels in 24 municipal zone types. The zone types with the most parcels are Wohnzone W2 (589), Landwirtschaftszone (501) and Dorfkernzone DK (287).
The median parcel is built to a volume utilization of 57 %; half of the parcels lie between 7 % and 114 %. The canton median is 32 %, so Ringgenberg (BE) sits above it.
The median building height is 8.6 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.24. Parcels built in the last 20 years reach a mean volume utilization of 111 % (95 parcels), higher than the 75 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone W2 | 589 | 92 % |
| Landwirtschaftszone | 501 | 2 % |
| Dorfkernzone DK | 287 | 102 % |
| Wohn-/Gewerbezone WG3 | 71 | 76 % |
| übrige Zone USP | 51 | 0 % |
| Gewerbezone G | 39 | 69 % |
| Wohn-/Gewerbezone WG2 | 30 | 69 % |
| Ferienhauszone | 18 | 79 % |
| Grünzone | 16 | 65 % |
| ZöN Parkplatz | 4 | 0 % |
| ZöN Altersheim | 3 | 100 % |
| ZöN Badeanstalt | 3 | 56 % |
| Other zones (12) | 18 | - |
Volume utilization (ratioV)
Of the 1’602 parcels with a value, half lie between 7 % and 114 %. The median is 57 % and the mean 71 %.
Share of parcels by range
- below 50 %48 %
- 50 % to below 100 %20 %
- 100 % to below 150 %19 %
- 150 % and above13 %
Floor-area ratio (GFZ)
Of the 1’601 parcels with a value, half lie between 0.06 and 0.57. The median is 0.24 and the mean 0.36.
Share of parcels by range
- below 0.5070 %
- 0.50 to below 1.0020 %
- 1.00 to below 1.507 %
- 1.50 and above3 %
Building height
Of the 1’104 parcels with a value, half lie between 7.1 m and 9.8 m. The median is 8.6 m and the mean 8.6 m.
Share of parcels by range
- below 8 m39 %
- 8 m to below 12 m56 %
- 12 m to below 20 m5 %
- 20 m and above0 %
Number of floors
Of the 878 parcels with a value, half lie between 1.4 and 2.8. The median is 2.1 and the mean 2.1.
Share of parcels by range
- below 227 %
- 2 to below 338 %
- 3 to below 535 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’630 | 75 % |
| Last 60 years | 472 | 112 % |
| Last 40 years | 292 | 122 % |
| Last 20 years | 95 | 111 % |
| Last 15 years | 59 | 109 % |
| Last 10 years | 36 | 100 % |
| Last 5 years | 15 | 90 % |
Open the map at Ringgenberg (BE)
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).