Oberdiessbach: observed built density
Municipality in the canton of Bern · FSO no. 619 · Parcel data as of July 2025
- Parcels
- 1’994
< 1 % of the canton
- Municipal zones
- 33
- Median utilization
- 10 %
Canton: 32 %
Switzerland: 10 %
- Median GFZ
- 0.09
Canton: 0.09
Switzerland: 0.09
- Median height
- 10.2 m
Canton: 9.5 m
Switzerland: 9.5 m
- Median floors
- 2.3
Canton: 2.3
Switzerland: 2.3
About Oberdiessbach
Oberdiessbach is a municipality in the canton of Bern. The parcel data lists 1’994 parcels in 33 municipal zone types. The zone types with the most parcels are Landwirtschaftszone (1’098), Wohnzone 2 (432) and Mischzone (161).
The median parcel is built to a volume utilization of 10 %; half of the parcels lie between 5 % and 90 %. The canton median is 32 %, so Oberdiessbach sits below it.
The median building height is 10.2 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.09. Parcels built in the last 20 years reach a mean volume utilization of 261 % (156 parcels), higher than the 104 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Landwirtschaftszone | 1’098 | 0 % |
| Wohnzone 2 | 432 | 77 % |
| Mischzone | 161 | 98 % |
| W2-ZPP Nr. 5 Haube | 64 | 108 % |
| Dorfkernzone | 43 | 100 % |
| W2-ZPP Nr. 4 Hohlenhaus | 38 | 71 % |
| W2-ZPP Nr. 3 Kirchbühl | 28 | 0 % |
| Arbeitszone 2 | 24 | 102 % |
| Kernzone | 18 | 50 % |
| W2-ZPP Nr. 9 Lehn | 18 | 97 % |
| Arbeitszone 1 | 16 | 1’970 % |
| M2-ZPP2 Mattenweg | 10 | 45 % |
| Other zones (21) | 44 | - |
Volume utilization (ratioV)
Of the 1’954 parcels with a value, half lie between 5 % and 90 %. The median is 10 % and the mean 89 %.
Share of parcels by range
- below 50 %59 %
- 50 % to below 100 %19 %
- 100 % to below 150 %11 %
- 150 % and above11 %
Floor-area ratio (GFZ)
Of the 1’954 parcels with a value, half lie between 0.04 and 0.48. The median is 0.09 and the mean 0.27.
Share of parcels by range
- below 0.5076 %
- 0.50 to below 1.0018 %
- 1.00 to below 1.505 %
- 1.50 and above2 %
Building height
Of the 965 parcels with a value, half lie between 8.5 m and 11.7 m. The median is 10.2 m and the mean 10.2 m.
Share of parcels by range
- below 8 m17 %
- 8 m to below 12 m62 %
- 12 m to below 20 m21 %
- 20 m and above< 1 %
Number of floors
Of the 660 parcels with a value, half lie between 1.8 and 2.8. The median is 2.3 and the mean 2.3.
Share of parcels by range
- below 27 %
- 2 to below 356 %
- 3 to below 537 %
- 5 and above< 1 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’994 | 104 % |
| Last 60 years | 667 | 182 % |
| Last 40 years | 447 | 202 % |
| Last 20 years | 156 | 261 % |
| Last 15 years | 115 | 306 % |
| Last 10 years | 51 | 542 % |
| Last 5 years | 32 | 123 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).