roomOpen the map

Loveresse: observed built density

Municipality in the canton of Bern · FSO no. 696 · Parcel data as of July 2025

Parcels
300

< 1 % of the canton

Municipal zones
16
Median utilization
18 %

Canton: 32 %

Switzerland: 10 %

Median GFZ
0.09

Canton: 0.09

Switzerland: 0.09

Median height
9.0 m

Canton: 9.5 m

Switzerland: 9.5 m

Median floors
2.2

Canton: 2.3

Switzerland: 2.3

About Loveresse

Loveresse is a municipality in the canton of Bern. The parcel data lists 300 parcels in 16 municipal zone types. The zone types with the most parcels are Zone agricole (105), Zone Centre Ancien (52) and Zone d'habitation, Toitures traditionnelles (51).

The median parcel is built to a volume utilization of 18 %; half of the parcels lie between 5 % and 112 %. The canton median is 32 %, so Loveresse sits below it.

The median building height is 9.0 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.09. Parcels built in the last 20 years reach a mean volume utilization of 108 % (38 parcels), lower than the 1’657 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone agricole1050 %
Zone Centre Ancien52114 %
Zone d'habitation, Toitures traditionnelles5187 %
Zone mixte35106 %
Reste du territoire - forêt300 %
Zone d'habitation, Toitures à un pan878 %
Zone de Ferme612 %
Zone d'activités397 %
Reste du territoire - rivière20 %
Zone affectée à des besoins publics "Stand de tir"250 %
Zone affectée à des besoins publics "Ecole et Mairie"1100 %
Zone affectée à des besoins publics "Place de Sport"10 %
Other zones (4)4-

Volume utilization (ratioV)

Of the 288 parcels with a value, half lie between 5 % and 112 %. The median is 18 % and the mean 1’115 %.

0 %300 %+

Share of parcels by range

  • below 50 %53 %
  • 50 % to below 100 %16 %
  • 100 % to below 150 %17 %
  • 150 % and above15 %

Floor-area ratio (GFZ)

Of the 288 parcels with a value, half lie between 0.05 and 0.41. The median is 0.09 and the mean 0.24.

0.003.00+

Share of parcels by range

  • below 0.5083 %
  • 0.50 to below 1.0014 %
  • 1.00 to below 1.503 %
  • 1.50 and above< 1 %

Building height

Of the 138 parcels with a value, half lie between 7.5 m and 10.4 m. The median is 9.0 m and the mean 9.0 m.

0 m60 m+

Share of parcels by range

  • below 8 m31 %
  • 8 m to below 12 m62 %
  • 12 m to below 20 m7 %
  • 20 m and above0 %

Number of floors

Of the 99 parcels with a value, half lie between 1.8 and 2.7. The median is 2.2 and the mean 2.2.

016+

Share of parcels by range

  • below 210 %
  • 2 to below 360 %
  • 3 to below 530 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years3001’657 %
Last 60 years104900 %
Last 40 years741’205 %
Last 20 years38108 %
Last 15 years30112 %
Last 10 years15134 %
Last 5 years5160 %

Open the map at Loveresse

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).