roomOpen the map

La Ferrière: observed built density

Municipality in the canton of Bern · FSO no. 435 · Parcel data as of July 2025

Parcels
423

< 1 % of the canton

Municipal zones
14
Median utilization
30 %

Canton: 32 %

Switzerland: 10 %

Median GFZ
0.08

Canton: 0.09

Switzerland: 0.09

Median height
9.2 m

Canton: 9.5 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.3

Switzerland: 2.3

About La Ferrière

La Ferrière is a municipality in the canton of Bern. The parcel data lists 423 parcels in 14 municipal zone types. The zone types with the most parcels are Zone agricole, territoire hore zone (305), Zone d'habitation de deux étages (48) and Zone du village ancien (28).

The median parcel is built to a volume utilization of 30 %; half of the parcels lie between 5 % and 143 %. The canton median is 32 %, close to the level of La Ferrière.

The median building height is 9.2 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.08. Parcels built in the last 20 years reach a mean volume utilization of 148 % (36 parcels), lower than the 177 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone agricole, territoire hore zone3050 %
Zone d'habitation de deux étages4899 %
Zone du village ancien28100 %
Zone d'habitation, 3 étages1592 %
Zone mixte, habitation et activités b8444 %
Zone d'activités industrielles et artisanales464 %
Zone affectée à des besoins publics 139 %
Zone affectée à des besoins publics 4376 %
Zone mixte, habitation et activités a3110 %
Zone affectée à des besoins publics 5250 %
Air ferroviaire1100 %
Zone affectée à des besoins publics 21100 %
Other zones (2)2-

Volume utilization (ratioV)

Of the 406 parcels with a value, half lie between 5 % and 143 %. The median is 30 % and the mean 161 %.

0 %300 %+

Share of parcels by range

  • below 50 %56 %
  • 50 % to below 100 %11 %
  • 100 % to below 150 %9 %
  • 150 % and above24 %

Floor-area ratio (GFZ)

Of the 406 parcels with a value, half lie between 0.04 and 0.28. The median is 0.08 and the mean 0.17.

0.003.00+

Share of parcels by range

  • below 0.5088 %
  • 0.50 to below 1.0010 %
  • 1.00 to below 1.502 %
  • 1.50 and above0 %

Building height

Of the 228 parcels with a value, half lie between 7.3 m and 11.6 m. The median is 9.2 m and the mean 9.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m32 %
  • 8 m to below 12 m46 %
  • 12 m to below 20 m21 %
  • 20 m and above0 %

Number of floors

Of the 152 parcels with a value, half lie between 1.6 and 2.8. The median is 2.1 and the mean 2.2.

016+

Share of parcels by range

  • below 218 %
  • 2 to below 351 %
  • 3 to below 529 %
  • 5 and above2 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years423177 %
Last 60 years122214 %
Last 40 years88191 %
Last 20 years36148 %
Last 15 years27170 %
Last 10 years16154 %
Last 5 years980 %

Open the map at La Ferrière

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).