roomOpen the map

Konolfingen: observed built density

Municipality in the canton of Bern · FSO no. 612 · Parcel data as of July 2025

Parcels
2’386

1 % of the canton

Municipal zones
43
Median utilization
9 %

Canton: 32 %

Switzerland: 10 %

Median GFZ
0.09

Canton: 0.09

Switzerland: 0.09

Median height
10.5 m

Canton: 9.5 m

Switzerland: 9.5 m

Median floors
2.2

Canton: 2.3

Switzerland: 2.3

About Konolfingen

Konolfingen is a municipality in the canton of Bern. The parcel data lists 2’386 parcels in 43 municipal zone types. The zone types with the most parcels are Landwirtschaftszone (1’113), Wohnzone W2 (545) and Mischzone M2 (124).

The median parcel is built to a volume utilization of 9 %; half of the parcels lie between 5 % and 80 %. The canton median is 32 %, so Konolfingen sits below it.

The median building height is 10.5 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.09. Parcels built in the last 20 years reach a mean volume utilization of 136 % (282 parcels), higher than the 75 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaftszone1’1130 %
Wohnzone W254562 %
Mischzone M212486 %
W6+ - UeO Nr. A Terrassenüberbauung Tonisbach Nr. 177/1 | terrassierte Wohnüber1140 %
Mischzone M38429 %
Wohnzone W37973 %
Mischzone M45959 %
Arbeitszone A15756 %
W2 - ZPP 1, Winkelmatt2997 %
W6+ - ZPP 13, Grünegg terrassierte Wohnüberbauung2769 %
Dorfzone Ursellen DU25137 %
W2 - ZPP 3, Sonnackerweg1797 %
Other zones (31)113-

Volume utilization (ratioV)

Of the 2’340 parcels with a value, half lie between 5 % and 80 %. The median is 9 % and the mean 68 %.

0 %300 %+

Share of parcels by range

  • below 50 %61 %
  • 50 % to below 100 %21 %
  • 100 % to below 150 %9 %
  • 150 % and above9 %

Floor-area ratio (GFZ)

Of the 2’340 parcels with a value, half lie between 0.04 and 0.48. The median is 0.09 and the mean 0.33.

0.003.00+

Share of parcels by range

  • below 0.5077 %
  • 0.50 to below 1.0017 %
  • 1.00 to below 1.504 %
  • 1.50 and above2 %

Building height

Of the 1’093 parcels with a value, half lie between 8.6 m and 12.4 m. The median is 10.5 m and the mean 10.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m17 %
  • 8 m to below 12 m55 %
  • 12 m to below 20 m28 %
  • 20 m and above< 1 %

Number of floors

Of the 848 parcels with a value, half lie between 1.7 and 2.8. The median is 2.2 and the mean 2.3.

016+

Share of parcels by range

  • below 212 %
  • 2 to below 353 %
  • 3 to below 533 %
  • 5 and above2 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years2’38675 %
Last 60 years738131 %
Last 40 years506132 %
Last 20 years282136 %
Last 15 years205141 %
Last 10 years122140 %
Last 5 years60134 %

Open the map at Konolfingen

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).