roomOpen the map

Kirchdorf (BE): observed built density

Municipality in the canton of Bern · FSO no. 872 · Parcel data as of July 2025

Parcels
1’959

< 1 % of the canton

Municipal zones
28
Median utilization
7 %

Canton: 32 %

Switzerland: 10 %

Median GFZ
0.06

Canton: 0.09

Switzerland: 0.09

Median height
9.4 m

Canton: 9.5 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.3

Switzerland: 2.3

About Kirchdorf (BE)

Kirchdorf (BE) is a municipality in the canton of Bern. The parcel data lists 1’959 parcels in 28 municipal zone types. The zone types with the most parcels are Landwirtschaftszone Kirchdorf (511), Landwirtschaftszone Gelterfingen (443) and Landwirtschaftszone Noflen (369).

The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 3 % and 48 %. The canton median is 32 %, so Kirchdorf (BE) sits below it.

The median building height is 9.4 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.06. Parcels built in the last 20 years reach a mean volume utilization of 121 % (154 parcels), lower than the 516 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaftszone Kirchdorf5110 %
Landwirtschaftszone Gelterfingen4430 %
Landwirtschaftszone Noflen3690 %
Wohnzone 2-geschossig Kirchdorf15585 %
Landwirtschaftszone Mühledorf1340 %
Mischzone 2-geschossig Kirchdorf98109 %
Abbau- und Ablagerungszone Gestelenwald Kirchdorf520 %
Wohnzone 2-geschossig Gelterfingen3491 %
Abbau- und Ablagerungszone Ried Kirchdorf210 %
Wohn- und Gewerbezone a Noflen2095 %
Bestandeszone Kirchdorf1875 %
Wohnzone B 2-geschossig Mühledorf17199 %
Other zones (16)87-

Volume utilization (ratioV)

Of the 1’928 parcels with a value, half lie between 3 % and 48 %. The median is 7 % and the mean 433 %.

0 %300 %+

Share of parcels by range

  • below 50 %75 %
  • 50 % to below 100 %10 %
  • 100 % to below 150 %7 %
  • 150 % and above8 %

Floor-area ratio (GFZ)

Of the 1’927 parcels with a value, half lie between 0.03 and 0.10. The median is 0.06 and the mean 0.11.

0.003.00+

Share of parcels by range

  • below 0.5091 %
  • 0.50 to below 1.008 %
  • 1.00 to below 1.501 %
  • 1.50 and above0 %

Building height

Of the 562 parcels with a value, half lie between 7.6 m and 11.6 m. The median is 9.4 m and the mean 9.6 m.

0 m60 m+

Share of parcels by range

  • below 8 m29 %
  • 8 m to below 12 m50 %
  • 12 m to below 20 m21 %
  • 20 m and above0 %

Number of floors

Of the 352 parcels with a value, half lie between 1.8 and 2.6. The median is 2.1 and the mean 2.2.

016+

Share of parcels by range

  • below 28 %
  • 2 to below 364 %
  • 3 to below 527 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’959516 %
Last 60 years423817 %
Last 40 years297581 %
Last 20 years154121 %
Last 15 years126124 %
Last 10 years38105 %
Last 5 years2094 %

Open the map at Kirchdorf (BE)

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).