roomOpen the map

Finsterhennen: observed built density

Municipality in the canton of Bern · FSO no. 493 · Parcel data as of July 2025

Parcels
524

< 1 % of the canton

Municipal zones
14
Median utilization
7 %

Canton: 32 %

Switzerland: 10 %

Median GFZ
0.07

Canton: 0.09

Switzerland: 0.09

Median height
9.5 m

Canton: 9.5 m

Switzerland: 9.5 m

Median floors
2.0

Canton: 2.3

Switzerland: 2.3

About Finsterhennen

Finsterhennen is a municipality in the canton of Bern. The parcel data lists 524 parcels in 14 municipal zone types. The zone types with the most parcels are Landwirtschaftszone (197), Dorfkernzone (132) and Auffüllfäche UeO "Kiesgrube Uf der Höchi" (77).

The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 4 % and 65 %. The canton median is 32 %, so Finsterhennen sits below it.

The median building height is 9.5 m at 2.0 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 116 % (31 parcels), higher than the 42 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaftszone1970 %
Dorfkernzone132105 %
Auffüllfäche UeO "Kiesgrube Uf der Höchi"770 %
UeO übriges Gebiet420 %
Wohnzone 2-geschossig26113 %
Wohnzone 1-geschossig1590 %
UeO Zone Abbau Auffüllung Deponie130 %
Gewerbezone1274 %
übriges Gebiet UeO "Kiesgrube Uf der Höchi"40 %
Zone für öffentliche Nutzungen D20 %
Zone Werkareal1100 %
Zone für öffentliche Nutzungen A1100 %
Other zones (2)2-

Volume utilization (ratioV)

Of the 515 parcels with a value, half lie between 4 % and 65 %. The median is 7 % and the mean 39 %.

0 %300 %+

Share of parcels by range

  • below 50 %71 %
  • 50 % to below 100 %9 %
  • 100 % to below 150 %12 %
  • 150 % and above7 %

Floor-area ratio (GFZ)

Of the 515 parcels with a value, half lie between 0.04 and 0.25. The median is 0.07 and the mean 0.16.

0.003.00+

Share of parcels by range

  • below 0.5087 %
  • 0.50 to below 1.0011 %
  • 1.00 to below 1.502 %
  • 1.50 and above< 1 %

Building height

Of the 165 parcels with a value, half lie between 8.0 m and 11.2 m. The median is 9.5 m and the mean 9.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m25 %
  • 8 m to below 12 m59 %
  • 12 m to below 20 m15 %
  • 20 m and above1 %

Number of floors

Of the 121 parcels with a value, half lie between 1.7 and 2.4. The median is 2.0 and the mean 2.1.

016+

Share of parcels by range

  • below 210 %
  • 2 to below 376 %
  • 3 to below 514 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years52442 %
Last 60 years113107 %
Last 40 years82111 %
Last 20 years31116 %
Last 15 years23111 %
Last 10 years12134 %
Last 5 years5128 %

Open the map at Finsterhennen

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).