roomOpen the map

Evilard: observed built density

Municipality in the canton of Bern · FSO no. 372 · Parcel data as of July 2025

Parcels
1’004

< 1 % of the canton

Municipal zones
28
Median utilization
71 %

Canton: 32 %

Switzerland: 10 %

Median GFZ
0.33

Canton: 0.09

Switzerland: 0.09

Median height
9.0 m

Canton: 9.5 m

Switzerland: 9.5 m

Median floors
2.2

Canton: 2.3

Switzerland: 2.3

About Evilard

Evilard is a municipality in the canton of Bern. The parcel data lists 1’004 parcels in 28 municipal zone types. The zone types with the most parcels are W2, Wohnzone / Zone d'habitations (560), W1, Wohnzone / Zone d'habitations (175) and Landwirtschaftszone / Zone agricole (78).

The median parcel is built to a volume utilization of 71 %; half of the parcels lie between 9 % and 107 %. The canton median is 32 %, so Evilard sits above it.

The median building height is 9.0 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.33. Parcels built in the last 20 years reach a mean volume utilization of 106 % (79 parcels), higher than the 73 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
W2, Wohnzone / Zone d'habitations56077 %
W1, Wohnzone / Zone d'habitations17586 %
Landwirtschaftszone / Zone agricole780 %
K / C, Kernzone B / Zone centre V5162 %
Übriges Gebiet370 %
Ferienhauszone / Zone de Maisons de vacances1846 %
ZöN BASPO, Zone für Hochbauten / Zone destinée aux constructions1544 %
ZöN BASPO, Zone für Freianlagen / Zone destinée aux installations extérieures140 %
W4, Wohnzone / Zone d'habitation (innere Nutzung)13100 %
K / C, Kernzone A / Zone centre A884 %
ZöN UeO Dorfzentrum, Zone für öffentliche Nutzungen / Zone affectée à des besoin50 %
Waldrandzone40 %
Other zones (16)26-

Volume utilization (ratioV)

Of the 982 parcels with a value, half lie between 9 % and 107 %. The median is 71 % and the mean 70 %.

0 %300 %+

Share of parcels by range

  • below 50 %37 %
  • 50 % to below 100 %34 %
  • 100 % to below 150 %21 %
  • 150 % and above8 %

Floor-area ratio (GFZ)

Of the 982 parcels with a value, half lie between 0.08 and 0.51. The median is 0.33 and the mean 0.35.

0.003.00+

Share of parcels by range

  • below 0.5074 %
  • 0.50 to below 1.0022 %
  • 1.00 to below 1.503 %
  • 1.50 and above1 %

Building height

Of the 690 parcels with a value, half lie between 7.4 m and 10.8 m. The median is 9.0 m and the mean 9.2 m.

0 m60 m+

Share of parcels by range

  • below 8 m33 %
  • 8 m to below 12 m53 %
  • 12 m to below 20 m14 %
  • 20 m and above0 %

Number of floors

Of the 537 parcels with a value, half lie between 1.8 and 2.8. The median is 2.2 and the mean 2.3.

016+

Share of parcels by range

  • below 28 %
  • 2 to below 358 %
  • 3 to below 534 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’00473 %
Last 60 years378101 %
Last 40 years203103 %
Last 20 years79106 %
Last 15 years54112 %
Last 10 years25101 %
Last 5 years1298 %

Open the map at Evilard

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).