Remetschwil: observed built density
Municipality in the canton of Aargau · FSO no. 4039 · Parcel data as of July 2025
- Parcels
- 996
< 1 % of the canton
- Municipal zones
- 16
- Median utilization
- 64 %
Canton: 35 %
Switzerland: 10 %
- Median GFZ
- 0.35
Canton: 0.13
Switzerland: 0.09
- Median height
- 9.0 m
Canton: 9.3 m
Switzerland: 9.5 m
- Median floors
- 2.2
Canton: 2.2
Switzerland: 2.3
About Remetschwil
Remetschwil is a municipality in the canton of Aargau. The parcel data lists 996 parcels in 16 municipal zone types. The zone types with the most parcels are Wohnzone 2 (529), Landwirtschaftszone (214) and Dorfzone (76).
The median parcel is built to a volume utilization of 64 %; half of the parcels lie between 7 % and 107 %. The canton median is 35 %, so Remetschwil sits above it.
The median building height is 9.0 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.35. Parcels built in the last 20 years reach a mean volume utilization of 115 % (121 parcels), higher than the 71 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone 2 | 529 | 84 % |
| Landwirtschaftszone | 214 | 0 % |
| Dorfzone | 76 | 80 % |
| Wald | 48 | 0 % |
| Dorfzone Sennhof | 42 | 83 % |
| Kernzone | 21 | 80 % |
| Gewerbezone | 18 | 154 % |
| Landhauszone | 18 | 127 % |
| Zone für öffentliche Bauten und Anlagen | 10 | 0 % |
| Artenreiche Heuwiese / Weide | 5 | 0 % |
| Wohnzone 3 | 5 | 78 % |
| Wohn- und Gewerbezone | 4 | 0 % |
| Other zones (4) | 6 | - |
Volume utilization (ratioV)
Of the 980 parcels with a value, half lie between 7 % and 107 %. The median is 64 % and the mean 68 %.
Share of parcels by range
- below 50 %43 %
- 50 % to below 100 %29 %
- 100 % to below 150 %17 %
- 150 % and above11 %
Floor-area ratio (GFZ)
Of the 980 parcels with a value, half lie between 0.06 and 0.60. The median is 0.35 and the mean 0.38.
Share of parcels by range
- below 0.5066 %
- 0.50 to below 1.0025 %
- 1.00 to below 1.508 %
- 1.50 and above1 %
Building height
Of the 597 parcels with a value, half lie between 8.0 m and 10.1 m. The median is 9.0 m and the mean 9.0 m.
Share of parcels by range
- below 8 m25 %
- 8 m to below 12 m69 %
- 12 m to below 20 m6 %
- 20 m and above0 %
Number of floors
Of the 499 parcels with a value, half lie between 1.8 and 2.8. The median is 2.2 and the mean 2.3.
Share of parcels by range
- below 27 %
- 2 to below 361 %
- 3 to below 532 %
- 5 and above< 1 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 996 | 71 % |
| Last 60 years | 553 | 113 % |
| Last 40 years | 433 | 121 % |
| Last 20 years | 121 | 115 % |
| Last 15 years | 76 | 124 % |
| Last 10 years | 45 | 133 % |
| Last 5 years | 15 | 97 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).