Oberlunkhofen: observed built density
Municipality in the canton of Aargau · FSO no. 4073 · Parcel data as of July 2025
- Parcels
- 810
< 1 % of the canton
- Municipal zones
- 16
- Median utilization
- 57 %
Canton: 35 %
Switzerland: 10 %
- Median GFZ
- 0.39
Canton: 0.13
Switzerland: 0.09
- Median height
- 9.2 m
Canton: 9.3 m
Switzerland: 9.5 m
- Median floors
- 2.3
Canton: 2.2
Switzerland: 2.3
About Oberlunkhofen
Oberlunkhofen is a municipality in the canton of Aargau. The parcel data lists 810 parcels in 16 municipal zone types. The zone types with the most parcels are Wohnzone 2 (380), Landwirtschaftszone (146) and Wohnzone Hang (108).
The median parcel is built to a volume utilization of 57 %; half of the parcels lie between 7 % and 94 %. The canton median is 35 %, so Oberlunkhofen sits above it.
The median building height is 9.2 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.39. Parcels built in the last 20 years reach a mean volume utilization of 103 % (109 parcels), higher than the 64 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone 2 | 380 | 71 % |
| Landwirtschaftszone | 146 | 0 % |
| Wohnzone Hang | 108 | 74 % |
| Dorfzone | 43 | 92 % |
| Wohnzone 3 | 32 | 63 % |
| Wald | 25 | 0 % |
| Wohn- und Gewerbezone 3 | 17 | 51 % |
| Fromentalwiese, artenreiche Heuwiese | 15 | 0 % |
| Kantonsstrasse | 12 | 0 % |
| Gewerbezone | 8 | 63 % |
| Wohn- und Gewerbezone Andermatt-Areal | 7 | 62 % |
| Naturschutzzone gemäss Reusstaldekret | 5 | 0 % |
| Other zones (4) | 12 | - |
Volume utilization (ratioV)
Of the 795 parcels with a value, half lie between 7 % and 94 %. The median is 57 % and the mean 60 %.
Share of parcels by range
- below 50 %46 %
- 50 % to below 100 %31 %
- 100 % to below 150 %17 %
- 150 % and above6 %
Floor-area ratio (GFZ)
Of the 795 parcels with a value, half lie between 0.06 and 0.68. The median is 0.39 and the mean 0.41.
Share of parcels by range
- below 0.5060 %
- 0.50 to below 1.0032 %
- 1.00 to below 1.507 %
- 1.50 and above2 %
Building height
Of the 454 parcels with a value, half lie between 8.0 m and 10.7 m. The median is 9.2 m and the mean 9.4 m.
Share of parcels by range
- below 8 m25 %
- 8 m to below 12 m63 %
- 12 m to below 20 m11 %
- 20 m and above0 %
Number of floors
Of the 388 parcels with a value, half lie between 1.8 and 3.0. The median is 2.3 and the mean 2.4.
Share of parcels by range
- below 29 %
- 2 to below 348 %
- 3 to below 541 %
- 5 and above1 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 810 | 64 % |
| Last 60 years | 453 | 97 % |
| Last 40 years | 345 | 103 % |
| Last 20 years | 109 | 103 % |
| Last 15 years | 70 | 109 % |
| Last 10 years | 44 | 115 % |
| Last 5 years | 26 | 112 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).