Dintikon: observed built density
Municipality in the canton of Aargau · FSO no. 4194 · Parcel data as of July 2025
- Parcels
- 896
< 1 % of the canton
- Municipal zones
- 17
- Median utilization
- 64 %
Canton: 35 %
Switzerland: 10 %
- Median GFZ
- 0.30
Canton: 0.13
Switzerland: 0.09
- Median height
- 9.3 m
Canton: 9.3 m
Switzerland: 9.5 m
- Median floors
- 2.2
Canton: 2.2
Switzerland: 2.3
About Dintikon
Dintikon is a municipality in the canton of Aargau. The parcel data lists 896 parcels in 17 municipal zone types. The zone types with the most parcels are Wohnzone 2 (362), Landwirtschaftszone (244) and Kernzone (68).
The median parcel is built to a volume utilization of 64 %; half of the parcels lie between 6 % and 105 %. The canton median is 35 %, so Dintikon sits above it.
The median building height is 9.3 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.30. Parcels built in the last 20 years reach a mean volume utilization of 110 % (161 parcels), higher than the 69 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone 2 | 362 | 84 % |
| Landwirtschaftszone | 244 | 0 % |
| Kernzone | 68 | 99 % |
| Dorfzone | 42 | 89 % |
| Wohnzone 3 | 35 | 82 % |
| Wald | 34 | 0 % |
| Arbeitszone (Empfindlichkeitsstufe: IV / Gesamthöhe: 25) | 28 | 106 % |
| Wohn- und Arbeitszone 3 | 27 | 89 % |
| Wohnzone -3 | 26 | 145 % |
| Wohn- und Arbeitszone 2 | 9 | 87 % |
| Arbeitszone (Empfindlichkeitsstufe: III / Gesamthöhe: 15) | 7 | 0 % |
| Verkehrsfläche | 4 | 0 % |
| Other zones (5) | 10 | - |
Volume utilization (ratioV)
Of the 874 parcels with a value, half lie between 6 % and 105 %. The median is 64 % and the mean 66 %.
Share of parcels by range
- below 50 %45 %
- 50 % to below 100 %27 %
- 100 % to below 150 %20 %
- 150 % and above8 %
Floor-area ratio (GFZ)
Of the 874 parcels with a value, half lie between 0.06 and 0.52. The median is 0.30 and the mean 0.33.
Share of parcels by range
- below 0.5073 %
- 0.50 to below 1.0023 %
- 1.00 to below 1.503 %
- 1.50 and above1 %
Building height
Of the 515 parcels with a value, half lie between 7.7 m and 11.1 m. The median is 9.3 m and the mean 9.6 m.
Share of parcels by range
- below 8 m29 %
- 8 m to below 12 m57 %
- 12 m to below 20 m14 %
- 20 m and above1 %
Number of floors
Of the 393 parcels with a value, half lie between 1.7 and 2.7. The median is 2.2 and the mean 2.3.
Share of parcels by range
- below 210 %
- 2 to below 361 %
- 3 to below 527 %
- 5 and above2 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 896 | 69 % |
| Last 60 years | 438 | 106 % |
| Last 40 years | 340 | 111 % |
| Last 20 years | 161 | 110 % |
| Last 15 years | 85 | 114 % |
| Last 10 years | 41 | 114 % |
| Last 5 years | 19 | 120 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).